Page Comparison

ORG-29592

Icon improvements on left panel of Plot Details dialog

Much easier to tell a plot is a single plot or belongs to a group

In the past, when open a complicated graph to customize plot, it’s hard to tell if a plot is a single plot, or belongs to a group. For grouped plot, some Tabs only show when 1st member in the group is selected.

In Origin 2025, a single plot is denoted by , a plot blonging to a group is denoted by alternatingicons

ORG-29715

Grouping plots gets easier

Group nonadjacent plots and create multi-groups

Change of behavior and context menus changes in Object Manager to make it easier to group plots in a layer

1. New behavior of Set as Group Begin and Set as Group End: Right click a member in a group of plot and choose Set as Group Begin or Set as Group End will break the current group into two groups. In the past, plots before Set as Group Begin or after Set as Group End would become isolated single plots.

2. New Move as a New Group context menu: Select adjacent or non-adjacent plots in a group to move them into a new group. In the past, many steps were needed.

3. Group non-adjacent single plots: For isolated single plots, no matter same plot type or not, ctrl+ select them, right click and choose Group to make a new group with 1st plot’s plot type.

ORG-27177

Data Slicer on Graph

Add data slicer to graph to filter data

Three ways to add data slicer on graph. Slicer is on graph so source worksheet will not be filtered.

• Data: Slicer… menu

• Click the old Data Filter button. //button in pressed stage if there is filter on graph. Click it again will remove all filters in graph. Ctrl+Z to undo.

• Click the Data Slicer button on page level mini toolbar

Basic usage

More options when right clicking on filter. E.g. right click a text type filter and check Multiple Selection so instead of a dropdown list, user can pick multiple items in column.

Or right click to disable filter, delete filter or change filter to be another column

Right click in blank area to add another filter

Compare plots with different conditions

For single layer graph, use Duplicate Plot option to add duplicate plots in same layer with different filter conditions for each plot

Or duplicate into multiple layers with different filter conditions for each layer

Add Filter to control all layers in graph

For multi-layer graph, user can add filter to page level (check Common Filter for All layers/Plots) or to layer level (uncheck it)

Set condition will affect all layers

ORG-29671

Easy way to change all plot’s X data in a layer or whole page

Change X context menu on Layer and Page level

Right click in blank area within layer and choose Change X to change all plot’s X to be certain column.

Right click outside all layer frames and right click to change all plots in all layers' X to be certain column.

Note: There was only Change X context menu on when right clicking on a plot. User would have to click each plot to change the X data or go to Plot Setup dialog to change so. It’s cumbersome.

ORG-28659

Error bar tooltip

The error bar tooltip provides numerical details of the range of uncertainty around data points in a graph.

The x and y error info shows when mousing over data points plotted with error bars, or when mousing over error bars.

ORG-28723

Swap layers or swap graph objects

Select position of two layers, or two graphic objects

Swap position dropdown list is added on mini toolbar if two layers, or two graphic objects are selected.

It also shows on Object Edit toolbar on right side of workspace.

E.g. shift+select two layers and click the button.

ORG-28721

Show Layer info in the Graphs list box

List Layer numbers in parenthesis after corresponding Graph name

This helps user to associate graphs and its layers in preview window when merging graphs

ORG-29082

Add Note for Layout Window

Adding notes for layout window from Object Manager

Notes could only be added to graph window in Origin 2024b. In Origin 2025, notes can be added to layout window as well.

With Layout window active, click the Add Notes button on top of the Object Manager.

If there is notes for a layout window, there will be + inside the icon. Click it to read the notes.

ORG-28263

3 List orders in Batch Plotting Dialog

More ways to sort available books and sheets in Batch Plotting dialog

There was no sorting order option in Batch Plotting dialog.

Before Origin 2024b, books show in creation order and sheets show in appearance order. In Origin 2024b, both books and sheets show in alphabetic order.

In Origin 2025, 3 sorting modes are added. Click the column header to toggle them.

• Unsorted (default, old behavior before Origin 2024b)

• Sort ascending (default in Origin 2024b)

• Sort descending (similar sorting criteria as above type 2, but descending).

Note: Sheets in same book as source graph always show on top.

ORG-28297

Plot Menu for Image Window

Support plot menu for floating image window.

Float the image window to the other monitor then check the Plot menu

ORG-29079

Remove the limitation of 16 color toolbar icon for custom toolbar

Supoort 32bit color toolbar icon in custom toolbar

Before Origin2025, only 16 color toolbar icons are supported. If you choose a 24bit or 32bit color image for custom toolbar and restart Origin, you will get Button group bitmaps must be 16 color message.

ORG-29031

Histogram Auto Binning improvement for arithmetic sequences

Histogram Auto Binning improvement for arithmetic sequences

When count(unique(input))<=10, we can sort the unique(input) and check if they are arithmetic sequences. In an arithmetic sequence, the difference between consecutive terms is always the same. If they are arithmetic sequences, assume the difference between consecutive terms is delta, bin size=delta, bin begin should be min-delta/2, bin end is max+delta/2.

Implemented in Origin2025.

ORG-16510

Smartly adjust ticks when zoom in the graph

Improve the rule of showing ticks to show better ticks values when zooming in

In Origin2025 before, improve the below case that sometimes too few ticks sometimes too many ticks

1. Zoom in graph with hotkey/red dot

2. Apply scale of ROI in image to graph

ORG-29207

Save To Cloud support for project files

Support saving project to cloud

Can save project to cloud by menu: File: Save Project to Cloud…

If there is existing opju file with same name on cloud, for OneDrive/SharePoint, will show dialog to ask replace or not; for Google Drive, save it directly.

ORG-29595

Enable Template Library Toolbar Button for Image Window

When image window is active, the menu “Plot → Extended Templates“ and Template Library button is available.

Import an image to image window then choose the menu “Plot → Extended Templates“ or Template Library button.

ORG-26759

Using LaTeX directly in column label rows

No need to put LaTeX inside \q( )

ORG-29626

Support LaTeX math escape in Origin Text

Introduce more familiar way to display LaTex in Origin Text

Instead of using \q() notation to use LaTex, Origin 2025 introduces more familiar ways as following, so user can directly copy content from notes to a scientific paper, and vise versa.

\[latex here\]
\(latex here\)

Example

\[\sqrt[n]{abc}\]
\(\sqrt[n]{abc}\)

ORG-29311

Separate Notes preview window

Notes Window Preview to allow side by side viewing of HTML source and results

Hit Ctrl + 2 to toggle separate preview window on and off. Ctrl+R to refresh after editing raw text. The preview can even be put to 2nd monitor as floating window

ORG-29183

Character Column in Column Label Row Dialog

Easier way to find the character for column label row to use it in legend and text editing

To customize legend or text labels in graph with metadata, user would need to go to Document page to find the corresponding char for each label row, e.g. F for filter row, LD1 for 1st user-defined parameter row, etc.

Now such char shows in Column Label Rows dialog (right click any label row header and choose Edit Column Label Rows…) so user can easily find the syntax.

ORG-29327

MT for box chart with no box

Support change percentile symbol Fill color, Shape, Size and improve the Box&Whisker button fly-out

ORG-29728

Easier way to expand or collapse nodes

Context menu in Object Manager and the bottom nodes of Plot Setup dialog to expand layer, group nodes.

Right click on Layer or Group node to see the newly added context menus to expand or collapse all sibling nodes.

ORG-29317

Show MT of non-text when drag to select connected objects

Improve the mini toolbar when drag to select connected objects like asterisk, distance annotation, angle annotation

In Origin2025 before, if drag to select connected objects like asterisk, distance annotation, angle annotation, it does not show mini toolbar, now support the same mini toolbar as hold CTRL to select non-text objects

ORG-29248

Easier way to select/hide/show multiple objects in Object Manager

Support Select all with Same Type when clicking on a graph object or text in Object Manager

ORG-29474

Find Folder/Window Notes

Improvements of Find in Project dialog (F3) in Origin 2025.

1. When double click Folder Notes in search result of Find in Project dialog, Origin will go to the folder, and also open the folder notes.

2. When double click Graph/Book Notes in search result of Find in Project dialog, Origin will go to the folder, and also open the notes.

3. Add “Notes“ checkbox on “Select Metadata” dialog. For sheet notes, rename “Long Name, Short Name, Comments” to “Label, Name, Notes“ respectively

4. 

5. Graph & Book notes will use “Page Notes“ for Attribute and tooltip.

   

ORG-29482

Inform User that the OPJU already open in another instance of Origin

Inform User that the OPJU already open in another instance of Origin

In Origin 2024b and earlier versions, when users keep Origin project open quite some time and on many occasions they forgot about it and launched the same project just by double-click. It opens the second instance of Origin without any warning that the same project is already open.

In Origin 2025, when openning a project and Origin found it to be read only, Origin will check that it has already been open by another instance, then will show a message to inform users so they can cancel. After that, Origin will tell that instance to activate to the front.

ORG-29906

PE List Hide All should keep Name

PE List Hide All should keep Name

In Origin 2024b and earlier versions, Project Explorer, Contents Panel, List View Columns Context Menu Hide All, Name column will be hidden.

In Origin 2025, Name column will be kept.