Graphing
General
JIRA | SUMMARY | DETAILS |
|---|---|---|
LaTeX using third party extension fails to show dark mode | In Dark mode, LaTeX inserted using third party extension is dark. Fixed in Origin 2025. By default, it will show in white in dark mode. Corresponding system variable @SVGDM (LaTeX SVG supports dark mode). 0 = off. 1 (default)= On. | |
Horizontal or vertical line sometimes disappear when anti-aliasing is enable | When anti-liasing is on, resize graph window, sometimes horizontal of vertical line plots or error bars would disappear. Fixed in Origin 2025. | |
Fit Page to layer didn’t consider cut-off | When trying to fit page to layer, if a data point was not clipped, then the related error bar would be included. Fixed in Origin 2025 so if it is not clipped, the error bar will not be included. | |
Strange string shows if Scale In graph with graph object | When Scale in graph with graph object, strange string shows Fixed in Origin2025 | |
OM fails to display correct info when switching folder if docked together with Project Explorer | Docked Object Manager with Project Explorer as 2 tabs, switch folder in Project Exlorer and active Object Manager, Object Manager display wrong info Fixed in Origin2025 | |
3D graph display and plotting issue if fresh Origin instance |
Fixed in Origin2025 | |
3D Graph's Color Scale Title fails to show LaTeX formula | 1.New a project, open attached “3DTextLaTeX.opju“ → notice that there are two 2D text objects on the graph, same contents. 2.Open Object Properties for one of them, paste the LaTeX Formula as the 2nd line, click OK. \q(\left\langle{{F}_{l}}\right\rangle)
==> The normal text part became jagged. Fixed in Origin2025 | |
3D Scatter Projected Points are obscured by other points. | In a 3D scatter plot, the project points are obscured behind other points. Fixed in Origin 2025 | |
Tooltip of Parallel sets plot does not update when moving around |
Fixed in Origin2025 | |
3D Axis dialog only accepted Julian date | In a 3D plot, click on an axis dialog that uses Date format and go to Scale. Instead of the axis dialog showing Julian Date for From and To, it uses date time format. | |
Light mode windows coloring control |
Fixed in Origin2025 | |
Collect issues for new arrow shape |
==> no change Fixed in Origin2025 | |
Layer Icon Disappear When Resize Window |
Fixed in Origin2025 | |
Drag log scale issues | For log scale graph, drag the axis scale with red dot fails to extend range Fixed in Origin2025 | |
Bracket Issue when dragging end point to opposite position |
Fixed in Origin2025 | |
Calculation Error When Undo Margin Change |
Fixed in Origin2025 We also support undo legend margin change for 3D in Origin2025. | |
XYZ scatters are not in correct position if added on virtual matrix surface |
==>The coordinate of the scatters are wrong, The first point locates on X=-1 though it’s X value is 0 Fixed in Origin2025 | |
Edits transparency resets color increment on Group tab |
Fixed in Origin2025 | |
Change in order from applying System Theme → System increment list color to System increment list color → System Theme because color theme was not correctly updating | The issue in the past was when a theme included a custom color list, when setting the theme as the system theme, the color would not modify correctly. Fixed in Origin2025 | |
Redundant pattern fill for line plot |
Fixed in Origin2025. | |
Deleting some groups in OM will also mistakenly remove the ones in the bottom | In Object Manager, hold Shift to select multiple group and remove, sometimes bottom groups are removed too Fixed in Origin2025 | |
Enlarged Graph only follows plot colors in first layer for multi-layer plots | When Ctrl+drag to select ROI region with Scale In toolbar, enlarged graph always follow the plot color of Layer1, In Origin2025, will follow plot color of corresponding layer | |
Second Axis with Formula Fails on Y Axis | Plot scatter with random number, active the Y axis and click Add Second Axis mini toolbar button, set Direct Formula set as x + 4, Inverse Formula as x - 4. ==> Wrong right Y axis Fixed in Origin2025 | |
Image display issue in Data Point Tooltip | .New a project, open attached DPtooltip.opju → notice that col(C) in Book1 contains some images, first 2 cells' image is portrait orientation. (width < height) → notice on data point tooltip’s preferences, Type combo is set as “Single Cell“, and Column Width is set as 45. 3.Activate Graph1, mouse over the 3rd (or 4th) point to show data point tooltip → The image in tooltip can show completely. 4.Mouse over the 1st (or 2nd) point. ==> The image is cut off. Fixed in Origin2025. |
Data Handling
Import
JIRA | SUMMARY | DETAILS |
|---|---|---|
Data import failed after moving some newly created columns to beginning of worksheet | Import data via CSV/Text data connector and then add new column(s) at the end to do some calculation, etc. Then move such new column to the beginning of the worksheet. Save the project and reload it. Click the connector icon and choose Import to reload data. ==> Failed to import. Fixed in Origin 2025. | |
XML Connector Namespace Handling | If the root element contains colon that denotes namespace(like “ADELlaserBeamPositionKpiHis:Report”), and then select it to import by XML Connector. ==>Failed to import. Fixed in Origin 2025. | |
Ignore Data Connector in Data Sheet if Data Source is not from Files | For batch processing, when data source is not from file, it is not possible to connect to data from worksheet with Data Connector. Fixed in Origin 2025. When there is data connector in data sheet, connector should be ignored, the selected worksheet or range should copy to data sheet(paste from 1st column). |
Export
JIRA | SUMMARY | DETAILS |
|---|---|---|
Export Excel failed with Japanese characters in Sheet name | Export to excel with Japanese characters in Sheet. ==> Error message: “Japanese characters“ sheet name does not satisfy Excel naming rule and is not exported. Fixed in Origin 2025. | |
Preview in Export Graph failed if ever exported | New a project, make Message Log window visible, new a graph window. 2.Press Ctrl+G to open Export Graph (Advanced) dialog, click Apply. → it exports successfully and dumped the path in Log window. 3.Click Preview button. ==> Error message dumped 2 times “Fail to get extension for image type Unknown“. ==> Preview panel is still empty. Fixed in Origin2025 | |
Exported SVG failed to display axis notation | When exporting a graph with scientific notation on the axis, The graph did not display scientific notation when exported as SVG. Fixed in Origin2025 | |
System Parameter with cell linking failed to be exported as displayed text |
==> The second row labels are not exported correctly. Fixed in Origin2025 | |
Line objects on graphs cause issues |
Fixed in Origin2025 | |
copy graph as image mess up when set do not clip in MT |
Fixed in Origin2025 | |
export SVG became slow |
==> it took several seconds to export the graph in 2024b, but it takes less than 1 sec in 2024. Fixed in Origin2025 | |
Export Graph Dialog should not change Dark Mode setting in Preference Dialog |
Fixed in Origin2025 | |
Big Gap Show in Report Sheet After Print |
Fixed in Origin2025. |
Worksheet
JIRA | SUMMARY | DETAILS |
|---|---|---|
Sheet failed to update in current active sheet after changing sheet name. | In a Gaussian sheet, change the sheet name to some other name. The name of the book is changed, but the name for the sheet is not updated. Also when saving the project, and changing the data, the formulas that use the sheet name are not updated. Fixed in Origin 2025. Formulas will update and sheets/books will update. | |
Autofill to left or up direction would fill increasing number text and autofill for row direction does not work well for date data. | In a new workbook, fill A10 with text like “a10”. When dragging up to A1, it would fill increasing number text like a11,a12,… In a new workbook with 6 columns, set the columns as Date format, type 1/1/2024 in A1 cell and 2/1/2024 in B2 cell. When dragging the 2 highlighted cells to F1, the 4th cell did not fill the first date of the month. Fixed in Origin 2025. | |
0 refers to the last index if by X when we want it to be the value 0 | When changing parameters and selecting the input, when setting the range, if 0 is used, it refers to the last point on the graph. It now maps to the value 0 instead of the last point. Fixed in Origin 2025 | |
Origin crashed on column formula with Vertical Cursor dialog opening | When Vertical Cursor opening, type some foruma in F(x) of source worksheet, then undo, crash Fixed in Origin 205 |
Matrix
JIRA | SUMMARY | DETAILS |
|---|---|---|
Generating grid results from a matrix are x-y exchanged | In a new worksheet with 3 columns, fill with random numbers and set col(C) as Z. Make a contour plot then right click the plot and select Generate Grid. Set X Grid Size as 31 and output as Matrix. Right click the upper-left corner and set the dimension to open the dialog. Since Origin 2016, it would output the x as y and the y as x. Fixed in Origin 2025 | |
Mshrink fail to work if input data type is complex | New a matrix then fill with complex data, run mshrink or msresize XF with shrink method. ==>Fail to calculate the result. Note: this issue existed since Origin 2024 and is fixed in Origin 2025. |
Analysis
General
JIRA | SUMMARY | DETAILS |
|---|---|---|
'0' should not Refer to Last Index if By X |
==> 0 in here will refer to last row and it will generate wrong result. Issue existed since Origin 2021b and fixed in Origin 2025. | |
PA does not report baseline fit parameters | When perform a baseline finding or baseline subtraction using a fitting function (such as poly5). ==>The fit parameters of the baseline are not stored anywhere for user to access. Fixed in Origin 2025.
| |
Correlation Coefficient Spearman shows wrong results when Kendall unchecked |
==>Spearman table shows wrong results. Fixed in Origin 2025. | |
Improve speed of range interpolation | Origin 2025 improved issues as below:
| |
Improve two-sample t-test for special case | Origin 2025 improved One-Sample T-Test, Two-Sample T-Test, Pair-Sample T-Test. When at least one of column’s SD is zero, Origin will show the footnote text in “t-Test Statistics” table like below.  | |
Wrong X result data if smooth on different partial ranges | Bug since multiple input are supported in smoothing tool in Origin 2024. To see the issue:
| |
No lock in graph if plot from image matrix with lock | Plot graph from the image matrix window with analysis lock. ==> No analysis lock in the plotted graph. Note: this issue existed since Origin 2021 and fixed in Origin 2025. |
Fitting
JIRA | SUMMARY | DETAILS |
|---|---|---|
Reset All Graphs cause the Residual Plots embedding | After fitting, right click in FitNL sheet, then click Rest All Graphs context menu, Residual Plots changes to text “embedding“ Fixed in Origin2025 | |
PCA change parameters generate redundant result sheet | After changing Principal Component Analysis parameters, Origin will generate redundant result sheet. Fixed in Origin2025 | |
NLFit Data selection pipe character in LN error | In NLFit Input Data Range droplist, if Long Name with pipe character | as end, all columns after the Long Name column are combined into the same column selection. Fixed in Origin2025 |
Image Analysis
JIRA | SUMMARY | DETAILS |
|---|---|---|
Fail to split Real32 type image | Open the Real32 type image in Origin then choose Image: Split Color Image menu. ==> Fail to split. Issue existed since Origin 2022 and fixed in Origin 2025. | |
Linked image object failed to show on Graph | If link the image to inactive layer in the multi-layers graph, save project then reopen it. ==> The linked image will not be update automatically. Note: this issue existed at least since Origin 2022 and fixed in Origin 2025. |
Programming
JIRA | SUMMARY | DETAILS |
|---|---|---|
Python originpro method from_df() Fail to Handle MultiIndex data frame | When multiIndex Pandas dataframe is passed to Origin with from_df() method, it gets imported as empty columns. After the fixing, index columns are imported into columns in Origin. | |
Internal python packages that are installed by user A failed to work for another user B | 1.Install internal python package, like numpy. 2.Switch to another windows user. 3.Run Origin and run “import originpro as op“ in Python Console. ==>Dumps error. Fixed in Origin 2025. | |
String Method Replace() did not Support Backslash |
The replace() method will replace all backslashes with forward slashes. After running the labtalk script, it will return the number of replacements done. Fixed in Origin 2025 |
Miscellaneous
JIRA | SUMMARY | DETAILS |
|---|---|---|
PE Tooltip Preview of HTML/Markdown Notes |
Fixed in Origin2025 | |
File selection dialog buttons small DPI Scaling Issue | In Import Wizard, select Data source […] which opens Import Multiple ASCII file selection dialog, the Folder Navigation buttons are small in High DPI monitor Fixed in Origin2025 | |
Origin very slow if worksheet is hidden | In Origin 2023b and 2024, Origin certain graphs will be very slow if worksheet is hidden. Fixed in Origin2025 |