Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

...

JIRASummaryDetails

ORG-15866

Contour Profile failed to update with change of data

After plotting Contour Profile, if user delete data, or change some data values, the profiles failed to update before Origin 2017 SR1

Note: This update only works with Image/Contour Profile tool on.

If you have closed Contour Profile tool so only Profile... button shows in graph, change in data will not update profiles.


ORG-15665

Graph in .org file (old Project file format) failed to showOpen org (old project file format) in Origin 2017 sr0. Graphs failed to show. Fixed in Origin 2017 SR1

ORG-15852

Runtime error when right click column header in middle panel of Plot Setup dialog

New issue in Origin 2017 Sr0.

Open Plot Setup dialog.
3. In select data table, right-click on the column header.
==> Error message "unable to convert COM object property to desired type" dumps to Message Log.

Fixed in Origin 2017 SR1

ORG-15840

Use XYZ column dataset plot contour lead crash in Origin 2017Highlight XYZ column to plot Contour
==> The project file crash.

ORG-15831

Column/Bar graph with variable width failed to draw width correctly for large X scale.

E.g. if X value (position of columns is e.g. 1e6, .... ) and on Spacing tab of Plot Details, set column bar width to be based on 3rd column with big values. Set Scaling Factor to 0 (Use X Unit).

The column bars becomes narrow lines.

ORG-15826

Origin crashes when deleting plots from graph

New issue in Origin 2017 Sr0.

Remove 1st plot in graph such as via in Plot Setup or Layer Contents, Object Manager, etc.,

==> Origin crashes.

Fixed in Origin 2017 SR1

ORG-15818

Error message prompt when set axis scale as discrete for some data1. New a wks and fill it with the following data:
1 1
5 2
12 3
14 4
2. Highlight the whole wks and make a scatter plot.
3. Open Axis dialog and go to Scale tab. Set scale type as discrete and click OK.
==> Error message prompt: Encountered an improper argument. And graph becomes blank.
Note:
1. The problem exists since Origin 2016 SR2. 
2. The problem would not show for some other data. 

ORG-15809


Extreme Slowdown in Workbook Calculations in Origin 2017 SR0

Customer found this

http://www.originlab.com/forum/topic.asp?TOPIC_ID=22972
This is because in Origin 2017 Sr0, we made a change is to make plot auto updated when source linked data was change,

but it also make workbook cell data auto update when link source changed, which is fine, but the checking for workbook

will slow down Origin heavily, especially for user's opj.

So in Origin 2017 SR1, a new system variable is added to control this behavior: @RSL.

It combines with 2 bits: 1 for graph, 2 for workbook. Default is 1. Set as 0 can rollback to same as Origin 2016.

ORG-15753

Text label is placed at incorrect positition in 9.4 SR0
Add some text label in Origin 2016 or earlier by the following code.
xpos_string=0.424;
label -s -a xpos_string 80 -j 0 -n TEST3 TESTLabel;
TEST3.rotate = 270;
TEST3.X=;

Open it in Origin 2017 Sr0. The text position changed.

This is because we added we include frame when deciding where the text label anchor point is in Origin 2017 Sr0.

In Origin 2017 SR1, system variable @TCC is added and set to 0 so Anchor on Frame is off.

This way text object created in Origin 2016 or older will not change position.

ORG-15961

Failed to set line with 0 width to make it disappear in graph

E.g. Plot an area graph and on line tab, set line width to 0. Line still showed.

This is newly broken in Origin 2017 Sr0. Fixed in Origin 2017 SR1.

This also exists in line plot, fill area, and stacked area plot, etc.

ORG-15661

Fill Area Under Curve->Fill to next data plot - Above Below Colors is broken when duplicate X values exists

This was a limitation since the pattern above and below feature was introduced in Origin 9.1.

We only allowed monotonic data. Removed the limitation in Origin 2017 SR1.

ORG-15552

Image Plot displayed wrong after Exchanging XY Axes

Reported on forum http://originlab.com/forum/topic.asp?TOPIC_ID=22852

Import Image file into Origin and choose Plot: Image Plot. Then choose Graph: Exchange X-Y Axes,

==> Result is wrong since Origin 8.1

Fixed in Origin 2017 SR1. Expected result

ORG-15983

Crash when using large dimension matrix data as colormap value and Fill color with piece by piece mode

1. New a matrix with 2 objects, set dimension as 1024 * 1024.
2. Set value in Mat(1) by script "matrix -v i;", Mat(2) by "matrix -v j;".
3. Active Mat(1), make a 3D Colormap Surface plot.
4. Open PD dialog, active Fill tab, choose Fill piece by piece: Map: Mat(2).
5. Click Apply.
==> Origin crashes.

Note: This problem exists since 92Sr0. Fixed in Origin 2017 SR1.

ORG-15914

Fill Area and Line plot draw differently since 2017 sr0

New issue in Origin 2017 Sr0 but hard to reproduce. The problem could be gone if set @dm=0.

Fixed in Origin 2017 SR1.

ORG-15976

3D XYZ Bar width is too thin for certain data

When deleting some data, all 3D bars became very thin and only gray lines show.

This existed since Origin 9.0 and fixed in Origin 2017 SR1.

New System Variable is added. @OGLBWF, XYZ Bar width calculation factor, default value is 2, 
if gridding result >= factor * datasize, we will reset to default size (sqrt(datasize) or datasize if too small).

ORG-16026

Issues when customizing same single Point on a plot that is plotted twice

Origin can't add two data labels to one plot. E.g. User as column A(X), B(Y) and other column C for label.

If user wants to show both Y values and column C labels in the graph, user has to plot the B data twice.

And for each plot, enable Labels, with one label from column C and one label from Y value.

Sometimes the data labels overlap so user may need to adjust position of certain label.

E.g. Ctrl+select a data label to select it and move it. Before Origin 2017 SR1, the other label of the same data point were moved as well.

ORG-15937

Color scale fails to generate for contour plot with colormapped line only

User can customize contour plot to hide color fill and only show colormapped line by

  1. Double click the plot.
  2. In the plot detail. Under Colormap/Contour tab, uncheck Color Fill
  3. Click the Line column header, check Link Line to Colormap Color

Before Origin 2017 SR1, color scaler failed to show for such graph.

ORG-16092

The length of grids and axis ticks seem to get shorter on the screen and in exported image in Origin 2017.

Before Origin 2017, axis line has rounded-end. If the line thickness is big, it doesn't look good. Therefore in Origin 2017 Sr0,

we added square-ended support and set it as default. Corresponding system variable @lca=2. ORG-11202)

Because of this change, the grids and axis ticks seem to get shorter on the screen and in exported image.

Fixed in Origin 2017 Sr1 by changing the length of line segment especially in dash automatically.

ORG-15826

Deleting a Plot From Graph with text object as legend causes crash in Origin 9.4

New issue in Origin 2017 Sr0.

  1. In a graph with grouped plot, press Ctrl key and drag the legend to be multiple columns
  2. Copy the legend and paste it to have a new text object
  3. Hide the first plot from the Plot Details dialog, or Object Manager

==> Origin crashes.

Fixed in Origin 2017 SR1

ORG-14863

Position Offset Values Not Saved to Annotation Default

Annotation position control is improved added in Origin 2017 sr0. But the Offset values of annotation position failed to be saved as default for future use.

Fixed in Origin 2017 Sr1.

...