...
Digitizer button on Standard toolbar and Tools: Digitizer... menu will open the new Digitizer tool.
New Digitizer GUI
(ORG-8762)
Improvements to GUI:
- Menus are added
- Relevant buttons are grouped
- Axes tab and Data Tabs to show Axis settings and picked data values.
- More hints
Auto trace Line & Digitize Area
These two new methods help customers digitize line object more simple and convenient.
- Auto Trace Line
- Digitize Area
Auto Trace Line
If Auto Trace Lines is enabled and a data point is selected as the target point, the other data points in the same curve (or more accurate, the same part of the curve) will be auto traced and picked up.
...
In order to change the grid direction and density, you need to select Settings:Digitize Settings from the menu item and do the settings in the Digitize Settings dialog in advance:
Remove Grid Line and Background
Origin 9.1 provides options to remove gridlines or clear the background color from the original graph, so that the data plot itself displays clearer
...
To use the option, select Image: Clear Background from the Digitizer menu
Ternary and Polar coordinate
Now Origin can not only digitize cartesian coordinate graphs, but also polar and ternary
Ternary Coordinate
To digitize a graph in ternary coordinate system, you should define the coordinate first.
- Click the menu items Axes:Ternary Coordinate...,
- Ternary Coordinate Settings dialog pops up for you to define the axes orientation in the imported image, either counter-clockwise or clockwise. Click OK to apply the settings and close dialog
- When the Ternary coordinate system is chosen, and the button is clicked, three reference points (P1, P2 and P3) are shown in the image. Drag the points to three vertexes of the ternary plot, and set the corresponding axes value
Polar Coordinate
To digitize a graph in polar coordinate system, you should define the coordinate first.
- Click the menu item Axes: Polar Coordinate...,
- Polar Coordinate Settings pops up for you to define the axes orientation in the imported image, either counter-clockwise or clockwise. Click OK to apply the settings and close dialog
- When the Polar coordinate system is chosen, and the button is clicked, two pairs of points (P1, P2 and P3, P4) are shown in the image as reference. Drag the points to a known position of image. Each pair needs to be on the same Azimuth angle (i.e. follows a radius line). Then enter the coordinate values to the theta and raidus columns. Image Pixel column shows the point position in the image by pixel.
Digitizing Multiple Curves
(ORG-1614)
To switch among different digitized points series, click the New Line button or select Digitize:New Line menu items.
Select Settings: Options from the Digitizer menu, You can change the color, shape and size for digitize symbol.
Magnifier
(ORG-8801)
The new digitizer also provide a Magnifier to help customers to pick data precisely.
...