Page Comparison

ORG-28056

Curve Arrow Tool draw bad arrow compared with Origin2023

When using Curve Arrow tool, the curve arrow looks worse in some cases

The issue exists in Origin2023b and Origin2024, fixed in Origin2024b

ORG-28305

Origin Hang when open PD with Mini toolbar

New a graph and click axis to show axis mini toolbar, press F2 to open Plot Detail ==> Origin hangs

Fixed in Origin2024b

ORG-28193

Uncheck Selectable failed to prohibit a plot from being selected

For certain project, it always selects the specified plot, and uncheck Selectable button fails

Fixed in Origin2024b

ORG-28085

Rescale Colormap Issue in Grouped Heatmap

1. Fill column A~C with row number, D with random data

2. select C and D set as Z, plot Heatmap with Split Tiles

3. Open PD, go to group tab, set group edit mode to independent

4. go to color map tab of 2nd plot, click level column head, click find min/max ==> Nothing happens.

Fixed in Origin2024b.

When edit mode is independent, it should find min max of this plot, not group min/max.

When edit mode is independent, we should rescale colormap button in single tab of plot level mini toolbar for heatmap.

ORG-28090

Group plot auto add error bar after set to independent

1. make 3D bars plot with XYZXYZ

2. open PD dialog, select the first plot, go to error bar tab, set Z error data as col(a), click apply

3. go to group tab, select independent, click OK
   ==> the second plot has error bar

Fixed in Origin2024b

ORG-28089

Cannot change pattern color for special point of 3D bars

1. make XYY 3D bars plot

2. add one special point, open PD dialog for it

3. go to pattern tab, set fill pattern to sparse, color to black, click apply

==> pattern color is not black

4. change pattern color to yellow, click OK

==> pattern color is not updated

1. make XYY 3D bars plot

2. add one special point, open PD dialog, go to pattern tab, add pattern, pattern color is auto, set border color to green, click apply

3. select the plot in the left panel, add pattern, click OK
   ==> the pattern color of special point is changed

Fixed in Origin2024b.

ORG-27070

By Plots Tab Support by Column Label

1. new wks with XYYY, set long name as aa 1 2 3, fill with row numbers

2. highlight all, make 4 panel plot

3. open PD dialog, go to layer background, set color to by layers: long name, click apply

4. click the color button again, set to color mapping, click apply

5. go to colormap tab,
   ==> level is from -2 to 2?

Fixed in Origin2024b

ORG-28243

Hide single point should hide corresponding error bar

Hold Ctrl key and double click a column/bar allows user to customize or turn off the column/bar. But it couldn’t hide the corresponding error bar there.

Fixed in Origin 2024b.

ORG-27511

graph objects show as bolded when insert graph to 3D graph

1. Open the sample opj, Area Graphs - XPS Area, or use P1’s opju

2. Create a 3d OpenGL graph like waterfall from the worksheet data

3. Copy page of the 2d graph and paste it to the 3d waterfall

==> Texts are still a little bold, check in dark mode. There is white background

Fixed in Origin2024b

ORG-28409

Point by Point legend is used if XYY bar use shape that is not Prism/box

1. fill column with row number, plot xyy bar

2. open PD, set shape to Cylinder or other shape that is no Prism/box, ok

3. reconstruct legend ==> legend become point by point legend

Fixed in Origin2024b

ORG-28260

Layer.group1.allcols=1 failed to work if deleting 1st Y column

LabTalk property Layer.group1.allcols=1 is used to set up a graph, created by plotting all columns in a worksheet, to auto add and remove plots when new columns are added, or existing columns are deleted in worksheet.

But this stops working if 1st Y column is deleted in worksheet.

Fixed in Origin 2024b.

ORG-28543

Origin crash in draw table

1. open attach file crash.opju, in which the graph window has table outside of graph page.

2. resize graph page width slowly, when the page right edge closes to the table left edge.

==>Origin crash.

Fixed in Origin2024b.

ORG-28565

Independent Mode does not work fine for Fill in 3D waterfall

1. Open Waterfall Plots - 3D Waterfall with Line and Scatter from Learning Center (any 3D waterfall should be the same)

2. In the Group tab of the PD dialog, set Edit Mode to be Independent.

3. In the Pattern tab, set Fill Color to be None. Click Apply button.

==> Fill Color of all curves on graph are changed to be None

4.Switch to the second plot in the left panel

→ The Fill Color in Pattern tab is still FAFAFA

1. Change the Fill Color to be black, click Apply button.

==>Fill color of the second plot on graph won’t change. It keeps to be none

Fixed in Origin2024b.

ORG-28358

Hit test failed on certain 3D XYY bar plot

Hit test failed on certain 3D OpenGL colormap surface plot

graphic card: Intel(R) UHD Graphics 770, 4.6.0 - Build 31.0.101.4575

1.New a project, open attached “3D Bar Charts - 3D XYY Cylinders.opju“

2.Mouse over any Cylinder bar on graph.

→ data point tooltip showed.

3.Single click on it.

==> Z axis line is selected and axis MT showed.

4.double click on it.

==>Axis dialog opened.

Fixed in Origin2024b

ORG-28643

Polar Dendrogram connect leaves in wrong direction

1. open attached CircularDendrogram.ogwu,

2. select both columns and run run.section(plot, CircularPhyTree); in script window

==>there are two closed circle in graph, but each 10 leaves belong to one group, so the line should not connect between subgroup_10 and subgroup_11

Fixed in Origin2024b

ORG-28688

collect dirty issues of 3D graph

1. New a worksheet with xyz, fill with random numbers, make 3D surface plot.

2. Activate new created graph, press Ctrl+J to copy page.
   ==>* is shown in window title, which means graph is dirty.

3. New a worksheet with xyz, fill with random numbers, make 3D scatter plot.
   ==>in new created graph, * is shown in window title, which means graph is dirty.

Fixed in Origin2024b

ORG-28741

Fail to reset to full plot range in C/G build

In the German or Chinese Origin, plot a scatter plot then edit the plot’s display range. Reset to full plot range by plot’s context menu.

==> Run time error.

This issue existed since Origin 2021 and fixed in Origin 2024b.

ORG-28733

Some Settings of Dendrogram not Save to Style Holder

1. open attached project, PolarDendrogram.opju

2. open PD, go to label tab, unchecked show labels for leaves only and auto hide overlapped labels, ok

3. select plot and copy format, right click plot and open paste format(advanced),

4. in All tree plots branch, select line branch, right click and select collapse all siblings.

5. change distance type to branch to leaves, uncheck show root at zero, ok

6. save template with this graph, template name is htreecir

7. select 1st two columns in Cluster Plot Data sheet, run “wo -p 108 htreecir;”

8. open PD with new graph, go to label tab ==> show labels for leaves only and auto hide overlapped labels are both selected

9. save format as theme from new created plot ==> distance type is auto, show root at zero is selected

Fixed in Origin2024b.

ORG-28806

Symbol type in 3D scatter is changed after selecting independent

1. make grouped 3d scatter plot

2. open PD dialog, go to symbol tab, set symbol type as 2d, click apply

3. go to group tab, set edit mode as independent, click apply
   ==> the symbol type of the second plot is change to 3d

Fixed in Origin2024b.

ORG-28800

Runtime error if plot 3d stack surface from user defined template

1. Open Samples\Matrix Conversion and Gridding\2D Gaussian.ogm

2. Add an matrix object then fill value with any numbers.

3. Choose Plot: 3D: 3D Stacked Surfaces menu to plot.

4. Change the palette as Maple by toolbar then save an templated named “abc“.

5. Active the matrix and make sure the 2nd matrix object is active.

6. Choose the Plot: User Templates: abc to plot.

==> Runtime error: Calling members of unattached wrapper class

Fixed in Origin2024b

ORG-28860

Delete Data Label should hide label

Case 1: 3d

1. plot a 3d scatter or bar with row number XYZ

2. select plot, show data label with mini toolbar

3. select data label, delete ==> plot is deleted

Case 2: 2d

1. plot a scatter plot with row number XY

2. select plot, show data label with mini toolbar

3. select data label, delete ==> nothing happen

Fixed in Origin2024b.

ORG-28852

Label selected bounding Rectangle is too large after Rotate

1. open attached TextRectangle.oggu

2. try to select red point ==>data labels are selected

3. 

   Fixed in Origin2024b

ORG-28808

Origin is slow with index plot color to 30000 points

1. Open the attached “20231209-BiCl3-Stability.opju“. The color of plot in the bottom layer is index to column(G) (29511 values)

==> Operations on the graph are slow, such as change the X axis scale to be 0~7 in the axis dialog

•  

  Code Block
  sec; doc -uw; queue{watch;}

  Fixed in Origin2024b.

ORG-29013

3D Graph's Color Scale Title fails to show LaTeX formula

1. plot a 3D graph and add color scale

2. show color scale’s title and input formula

   Code Block
   \q(\left\langle{{F}_{l}}\right\rangle)

   == > show nothing

3. double click at the title and the formula show

Fixed in Origin2024b

ORG-28212

Vector tab mess up

1. Make a XYXY vector plot

2. Double click plot to open PD → vector tab looks fine

3. Switch to any other tab, switch back to vector tab ==> End Point group mess up

ORG-28073

Crash if set Text as self info

1. New a graph window, add Text like aa

2. Open Properties dialog, Programming tab, set Link to (%, $), Substitution Level to 1

3. Switch to Text tab, set text content like aa=$(Text.x)

==> Crash

ORG-28332

Table Row Title Position is Wrong when Label Position is not Center

1. New graph, open axis dialog with x axis

2. Go to tick label tab and enable table

3. Select show table row title, apply --> Table row title show right after table

4. Change label position in cell to begin, apply ==> There is gap between title and table

5. Set table title to begin, apply ==> Table row title run into table

ORG-28183

Line Gap in Legend is Incorrect For Multiple Layers Line Symbol GraphORG-28183

1. Make a 2Ys Y-Y plot.

2. Open PD, and go to plot level: Line tab, set "Symbol/Line interface" as "Gap to Symbol" for both plots.

3. In PD layer level, Size tab, set Fixed Factor as 0.3 for Layer2, OK.
   ==>The line gap in legend for C in graph is incorrect.

4. Click Layer1 than Click Layer2 on Object manager.
   ==>The line gap of plot legends in Object manager are changed.

ORG-28147

Special point position is wrong

1. Create a Line plot,

2. select a special point, and open the plot detail dialog.

3. double click the name of Special point. -->the name of special point is editing.

4. Click OK.

==> the special point is in the End.

ORG-28213

Missing Value Category Show When AA is Enable

1. Fill 5 rows of A B with row number, C with AA BB CC AA BB

2. select C1 cell and clear content

3. select all and plot scatter, set symbol color to column C → 1st point is not show

4. enable Anti-Aliasing ==> 1st point show

ORG-28453

Color Scale Show Levels within Range Show Extra Level

1. fill column A B C with random data, plot color mapped

2. open PD, go to colormap tab, set level to 0~1, with increment=0.1, ok

3. open color scale control dialog, select show levels within range in Levels tab,

4. set minimum to 0.3, maximum to 0.7, ok ==> tick of 0.2 still show

ORG-28520

"No Line" change plot type and plot color after reload the project

1. Open some specific opju file, for red plot in Layer 2, change the Connect to No Line in the Line tab of PD dialog.

2. Save project file and reopen it in Origin

==> The plot type changed to be scatter plot and the red plot turns to be black.

ORG-28350

XYZ Contour crashes Origin when ignore Z missing value if data point shows

1. New a workbook with 3 columns, set as XYZ and fill it with random data.

2. Make a contour plot.

3. Run Script,

   Code Block
   set %c -cmd 1; //show data points set %c -lczm 1; //ignore Z missing value

   ==> Origin crashes.

ORG-28515

Origin crashed when substituted legend text is too long

1. Make a plot with very long comment (28000 bytes each) that makes super long legend string.

2. Save as opju and then reopen. ==> Origin crashes.

ORG-28345

Fail to Copy/Paste format on Reference Lines dialog

1. New a graph and add two reference lines in Reference Lines dialog

2. Uncheck Auto Format for both lines

3. Change color for one reference line and click Apply button

4. Go to the left panel, right-click on the changed line and select Copy Format

5. Right-click on the other line and select Paste Format, click OK button

==> nothing changes.

ORG-28569

Origin hanged when create distribution curve data for Kernel Smooth

1.Import some tif file into an image window.

2.Select Image menu - Convert to Column, click OK with default settings.

3.Highlight col A in output sheet to create a Histogram plot.

4.Open PD, go to Distribution tab, set Curve Type combo as Kernel Smooth, click Apply.

→ The curve showed on plot. (it is not slow, since it uses approximation algorithm)

5.Go to Data tab, check “Add Distribution Curves“, click Go button.

==> Origin hangs for a long time.

ORG-28569

Shift + mouse drag fail while moving obj in XY exchange graph

1. Make a group plot.

2. Exchange XY Axes.

3. Press Shift key and select legend object, drag it. ==> Cannot move legend to desired position.

ORG-28792

Radar Plot messed up when there is special point

1. Make a radar plot with random numbers, turn on the label, hold on Ctrl key and try to move it.

2. → a special point is created.

3. ==> The graph gets messed up.

ORG-28188

Origin hangs when batch plotting certain graph

1. Make lines plot using big data with missing value.

2. Right click on graph window title bar, select Duplicate (Bacth Plotting) to open dialog.

3. Select Batch Plot with combo as “Sheet“, keep other as default, select the 2 sheets in the list, click OK.

   ==> Origin hangs. After the fix, a new system variable @PFNCSX added, 1 to turn on fix above, 0 to turn off

ORG-28377

Origin crash in remove layer

1. New a worksheet and add three columns.

2. fill column A with row number.

3. fill B-E with random number.

4. select B-E to plot 4 Panels.

5. open plot details dialog, select the plot in Layer4, right click and select remove menu.

6. click OK on the warning dialog. ==> Origin crash.

ORG-26867

Open Axis dialog show error in script window when there is more than 32 panels

1. New worksheet, add one column, fill row number for 33 rows

2. plot scatter with column A B,

3. open PD, go to panel tab, set horizontal panel to column C, ok

4. open script window, double click axis to open axis dialog ==> Insert branch theme error (0x20010834) show in script window