Origin 2024b Bug Fixes

ORG-28056

Curve Arrow Tool draw bad arrow compared with Origin2023

When using Curve Arrow tool, the curve arrow looks worse in some cases

The issue exists in Origin2023b and Origin2024, fixed in Origin2024b

ORG-28305

Origin Hang when open PD with Mini toolbar

New a graph and click axis to show axis mini toolbar, press F2 to open Plot Detail ==> Origin hangs

Fixed in Origin2024b

ORG-28193

Uncheck Selectable failed to prohibit a plot from being selected

For certain project, it always selects the specified plot, and uncheck Selectable button fails

Fixed in Origin2024b

ORG-28085

Rescale Colormap Issue in Grouped Heatmap

1. Fill column A~C with row number, D with random data

2. select C and D set as Z, plot Heatmap with Split Tiles

3. Open PD, go to group tab, set group edit mode to independent

4. go to color map tab of 2nd plot, click level column head, click find min/max ==> Nothing happens.

Fixed in Origin2024b.

When edit mode is independent, it should find min max of this plot, not group min/max.

When edit mode is independent, we should rescale colormap button in single tab of plot level mini toolbar for heatmap.

ORG-28090

Group plot auto add error bar after set to independent

1. make 3D bars plot with XYZXYZ

2. open PD dialog, select the first plot, go to error bar tab, set Z error data as col(a), click apply

3. go to group tab, select independent, click OK
   ==> the second plot has error bar

Fixed in Origin2024b

ORG-28089

Cannot change pattern color for special point of 3D bars

1. make XYY 3D bars plot

2. add one special point, open PD dialog for it

3. go to pattern tab, set fill pattern to sparse, color to black, click apply

==> pattern color is not black

4. change pattern color to yellow, click OK

==> pattern color is not updated

1. make XYY 3D bars plot

2. add one special point, open PD dialog, go to pattern tab, add pattern, pattern color is auto, set border color to green, click apply

3. select the plot in the left panel, add pattern, click OK
   ==> the pattern color of special point is changed

Fixed in Origin2024b.

ORG-27070

By Plots Tab Support by Column Label

1. new wks with XYYY, set long name as aa 1 2 3, fill with row numbers

2. highlight all, make 4 panel plot

3. open PD dialog, go to layer background, set color to by layers: long name, click apply

4. click the color button again, set to color mapping, click apply

5. go to colormap tab,
   ==> level is from -2 to 2?

Fixed in Origin2024b

ORG-28243

Hide single point should hide corresponding error bar

Hold Ctrl key and double click a column/bar allows user to customize or turn off the column/bar. But it couldn’t hide the corresponding error bar there.

Fixed in Origin 2024b.

ORG-27511

graph objects show as bolded when insert graph to 3D graph

1. Open the sample opj, Area Graphs - XPS Area, or use P1’s opju

2. Create a 3d OpenGL graph like waterfall from the worksheet data

3. Copy page of the 2d graph and paste it to the 3d waterfall

==> Texts are still a little bold, check in dark mode. There is white background

Fixed in Origin2024b

ORG-28409

Point by Point legend is used if XYY bar use shape that is not Prism/box

1. fill column with row number, plot xyy bar

2. open PD, set shape to Cylinder or other shape that is no Prism/box, ok

3. reconstruct legend ==> legend become point by point legend

Fixed in Origin2024b

ORG-28260

Layer.group1.allcols=1 failed to work if deleting 1st Y column

LabTalk property Layer.group1.allcols=1 is used to set up a graph, created by plotting all columns in a worksheet, to auto add and remove plots when new columns are added, or existing columns are deleted in worksheet.

But this stops working if 1st Y column is deleted in worksheet.

Fixed in Origin 2024b.

ORG-28543

Origin crash in draw table

1. open attach file crash.opju, in which the graph window has table outside of graph page.

2. resize graph page width slowly, when the page right edge closes to the table left edge.

==>Origin crash.

Fixed in Origin2024b.

ORG-28565

Independent Mode does not work fine for Fill in 3D waterfall

1. Open Waterfall Plots - 3D Waterfall with Line and Scatter from Learning Center (any 3D waterfall should be the same)

2. In the Group tab of the PD dialog, set Edit Mode to be Independent.

3. In the Pattern tab, set Fill Color to be None. Click Apply button.

==> Fill Color of all curves on graph are changed to be None

4.Switch to the second plot in the left panel

→ The Fill Color in Pattern tab is still FAFAFA

1. Change the Fill Color to be black, click Apply button.

==>Fill color of the second plot on graph won’t change. It keeps to be none

Fixed in Origin2024b.

ORG-28358

Hit test failed on certain 3D XYY bar plot

Hit test failed on certain 3D OpenGL colormap surface plot

graphic card: Intel(R) UHD Graphics 770, 4.6.0 - Build 31.0.101.4575

1.New a project, open attached “3D Bar Charts - 3D XYY Cylinders.opju“

2.Mouse over any Cylinder bar on graph.

→ data point tooltip showed.

3.Single click on it.

==> Z axis line is selected and axis MT showed.

4.double click on it.

==>Axis dialog opened.

Fixed in Origin2024b

ORG-28643

Polar Dendrogram connect leaves in wrong direction

1. open attached CircularDendrogram.ogwu,

2. select both columns and run run.section(plot, CircularPhyTree); in script window

==>there are two closed circle in graph, but each 10 leaves belong to one group, so the line should not connect between subgroup_10 and subgroup_11

Fixed in Origin2024b

ORG-28688

collect dirty issues of 3D graph

1. New a worksheet with xyz, fill with random numbers, make 3D surface plot.

2. Activate new created graph, press Ctrl+J to copy page.
   ==>* is shown in window title, which means graph is dirty.

3. New a worksheet with xyz, fill with random numbers, make 3D scatter plot.
   ==>in new created graph, * is shown in window title, which means graph is dirty.

Fixed in Origin2024b

ORG-28741

Fail to reset to full plot range in C/G build

In the German or Chinese Origin, plot a scatter plot then edit the plot’s display range. Reset to full plot range by plot’s context menu.

==> Run time error.

This issue existed since Origin 2021 and fixed in Origin 2024b.

ORG-28733

Some Settings of Dendrogram not Save to Style Holder

1. open attached project, PolarDendrogram.opju

2. open PD, go to label tab, unchecked show labels for leaves only and auto hide overlapped labels, ok

3. select plot and copy format, right click plot and open paste format(advanced),

4. in All tree plots branch, select line branch, right click and select collapse all siblings.

5. change distance type to branch to leaves, uncheck show root at zero, ok

6. save template with this graph, template name is htreecir

7. select 1st two columns in Cluster Plot Data sheet, run “wo -p 108 htreecir;”

8. open PD with new graph, go to label tab ==> show labels for leaves only and auto hide overlapped labels are both selected

9. save format as theme from new created plot ==> distance type is auto, show root at zero is selected

Fixed in Origin2024b.

ORG-28806

Symbol type in 3D scatter is changed after selecting independent

1. make grouped 3d scatter plot

2. open PD dialog, go to symbol tab, set symbol type as 2d, click apply

3. go to group tab, set edit mode as independent, click apply
   ==> the symbol type of the second plot is change to 3d

Fixed in Origin2024b.

ORG-28800

Runtime error if plot 3d stack surface from user defined template

1. Open Samples\Matrix Conversion and Gridding\2D Gaussian.ogm

2. Add an matrix object then fill value with any numbers.

3. Choose Plot: 3D: 3D Stacked Surfaces menu to plot.

4. Change the palette as Maple by toolbar then save an templated named “abc“.

5. Active the matrix and make sure the 2nd matrix object is active.

6. Choose the Plot: User Templates: abc to plot.

==> Runtime error: Calling members of unattached wrapper class

Fixed in Origin2024b

ORG-28860

Delete Data Label should hide label

Case 1: 3d

1. plot a 3d scatter or bar with row number XYZ

2. select plot, show data label with mini toolbar

3. select data label, delete ==> plot is deleted

Case 2: 2d

1. plot a scatter plot with row number XY

2. select plot, show data label with mini toolbar

3. select data label, delete ==> nothing happen

Fixed in Origin2024b.

ORG-28852

Label selected bounding Rectangle is too large after Rotate

1. open attached TextRectangle.oggu

2. try to select red point ==>data labels are selected

3. Open

   

   Fixed in Origin2024b

ORG-28808

Origin is slow with index plot color to 30000 points

1. Open the attached “20231209-BiCl3-Stability.opju“. The color of plot in the bottom layer is index to column(G) (29511 values)

==> Operations on the graph are slow, such as change the X axis scale to be 0~7 in the axis dialog

•  

  sec; doc -uw; queue{watch;}

  Fixed in Origin2024b.

ORG-29013

3D Graph's Color Scale Title fails to show LaTeX formula

1. plot a 3D graph and add color scale

2. show color scale’s title and input formula

   \q(\left\langle{{F}_{l}}\right\rangle)

   == > show nothing

3. double click at the title and the formula show

Fixed in Origin2024b

ORG-28212

Vector tab mess up

1. Make a XYXY vector plot

2. Double click plot to open PD → vector tab looks fine

3. Switch to any other tab, switch back to vector tab ==> End Point group mess up

ORG-28073

Crash if set Text as self info

1. New a graph window, add Text like aa

2. Open Properties dialog, Programming tab, set Link to (%, $), Substitution Level to 1

3. Switch to Text tab, set text content like aa=$(Text.x)

==> Crash

ORG-28332

Table Row Title Position is Wrong when Label Position is not Center

1. New graph, open axis dialog with x axis

2. Go to tick label tab and enable table

3. Select show table row title, apply --> Table row title show right after table

4. Change label position in cell to begin, apply ==> There is gap between title and table

5. Set table title to begin, apply ==> Table row title run into table

ORG-28183

Line Gap in Legend is Incorrect For Multiple Layers Line Symbol GraphORG-28183

1. Make a 2Ys Y-Y plot.

2. Open PD, and go to plot level: Line tab, set "Symbol/Line interface" as "Gap to Symbol" for both plots.

3. In PD layer level, Size tab, set Fixed Factor as 0.3 for Layer2, OK.
   ==>The line gap in legend for C in graph is incorrect.

4. Click Layer1 than Click Layer2 on Object manager.
   ==>The line gap of plot legends in Object manager are changed.

ORG-28147

Special point position is wrong

1. Create a Line plot,

2. select a special point, and open the plot detail dialog.

3. double click the name of Special point. -->the name of special point is editing.

4. Click OK.

==> the special point is in the End.

ORG-28213

Missing Value Category Show When AA is Enable

1. Fill 5 rows of A B with row number, C with AA BB CC AA BB

2. select C1 cell and clear content

3. select all and plot scatter, set symbol color to column C → 1st point is not show

4. enable Anti-Aliasing ==> 1st point show

ORG-28453

Color Scale Show Levels within Range Show Extra Level

1. fill column A B C with random data, plot color mapped

2. open PD, go to colormap tab, set level to 0~1, with increment=0.1, ok

3. open color scale control dialog, select show levels within range in Levels tab,

4. set minimum to 0.3, maximum to 0.7, ok ==> tick of 0.2 still show

ORG-28520

"No Line" change plot type and plot color after reload the project

1. Open some specific opju file, for red plot in Layer 2, change the Connect to No Line in the Line tab of PD dialog.

2. Save project file and reopen it in Origin

==> The plot type changed to be scatter plot and the red plot turns to be black.

ORG-28350

XYZ Contour crashes Origin when ignore Z missing value if data point shows

1. New a workbook with 3 columns, set as XYZ and fill it with random data.

2. Make a contour plot.

3. Run Script,

   set %c -cmd 1; //show data points set %c -lczm 1; //ignore Z missing value

   ==> Origin crashes.

ORG-28515

Origin crashed when substituted legend text is too long

1. Make a plot with very long comment (28000 bytes each) that makes super long legend string.

2. Save as opju and then reopen. ==> Origin crashes.

ORG-28345

Fail to Copy/Paste format on Reference Lines dialog

1. New a graph and add two reference lines in Reference Lines dialog

2. Uncheck Auto Format for both lines

3. Change color for one reference line and click Apply button

4. Go to the left panel, right-click on the changed line and select Copy Format

5. Right-click on the other line and select Paste Format, click OK button

==> nothing changes.

ORG-28569

Origin hanged when create distribution curve data for Kernel Smooth

1.Import some tif file into an image window.

2.Select Image menu - Convert to Column, click OK with default settings.

3.Highlight col A in output sheet to create a Histogram plot.

4.Open PD, go to Distribution tab, set Curve Type combo as Kernel Smooth, click Apply.

→ The curve showed on plot. (it is not slow, since it uses approximation algorithm)

5.Go to Data tab, check “Add Distribution Curves“, click Go button.

==> Origin hangs for a long time.

ORG-28569

Shift + mouse drag fail while moving obj in XY exchange graph

1. Make a group plot.

2. Exchange XY Axes.

3. Press Shift key and select legend object, drag it. ==> Cannot move legend to desired position.

ORG-28792

Radar Plot messed up when there is special point

1. Make a radar plot with random numbers, turn on the label, hold on Ctrl key and try to move it.

2. → a special point is created.

3. ==> The graph gets messed up.

ORG-28188

Origin hangs when batch plotting certain graph

1. Make lines plot using big data with missing value.

2. Right click on graph window title bar, select Duplicate (Bacth Plotting) to open dialog.

3. Select Batch Plot with combo as “Sheet“, keep other as default, select the 2 sheets in the list, click OK.

   ==> Origin hangs. After the fix, a new system variable @PFNCSX added, 1 to turn on fix above, 0 to turn off

ORG-28377

Origin crash in remove layer

1. New a worksheet and add three columns.

2. fill column A with row number.

3. fill B-E with random number.

4. select B-E to plot 4 Panels.

5. open plot details dialog, select the plot in Layer4, right click and select remove menu.

6. click OK on the warning dialog. ==> Origin crash.

ORG-26867

Open Axis dialog show error in script window when there is more than 32 panels

1. New worksheet, add one column, fill row number for 33 rows

2. plot scatter with column A B,

3. open PD, go to panel tab, set horizontal panel to column C, ok

4. open script window, double click axis to open axis dialog ==> Insert branch theme error (0x20010834) show in script window

ORG-28021

Color Mapping List should have higher Priority when @DCR=5

1. set @DCRP = 30, enable dark mode

2. plot a single line plot with row number==>line plot color and axis line color are different

ORG-28476

Fit page to layer does not work when there is multiple breaks; Plot Break Symbol does not draw correctly for multi breaks

1. Make a plot with multiple breaks (one in left axis and one in right axis).

2. Select menu: “*Graph: Fit Page to Layers*“ ==> Nothing changed. There are still wide margins on the graph.

3. Make a plot with multiple breaks (two breaks in left axis).

4. Click on the break symbol on axis and click the last “Plot Break Symbol“ MT button. ==> The plot on second break does not break into 2 parts.

5. Select the Y axis and press Del key to delete. ==> Plot Break Symbol does not draw.

ORG-28647

German comma decimal separator in Axis Divide by Factor not convert to period

1. Change Separators combo to be 1.000,0

2. New a sheet and fill x with row number and y with very small numbers so that scientific notation is displayed.

3. Plot line graph and Y-axis should also have scientific notation.

4. Go to Y-axis dialog and for “Divide by Factor”, enter the highest tick label

5. Click OK and save Project and close Project.
   -->Tick labels change correctly.

6. Change Separator back to 1,000.0 and reopen Project file
   ==>The Divide by Factor is ignored, tick labels are not correct, comma is not converted to period.

ORG-28885

Right Y axis Plot Shouldn't be Affected By Left Y LogScale

1. Make a Double-Y plot with one left axis and one right axis.

2. Set Left-Y axis to log scale. ==> The negative points for right axis could not show.

ORG-28677

Error bars failed to connect within subset only

1. Make an error bar plot.

2. Set subset. ==> Graph1 has subset turned on but error bars failed to connect within subset only. It should follow line plot settings.

ORG-28815

Reference Line Label Position Inside End - Below does not work in Chinese Origin

In Chinese Origin, the Label Position of Reference line has two same options, 末端内测-下. And if you select the two options, both options result in label in Inside End-Below. There is no way to set label of reference line to be in Inside End- Above in C Origin.

ORG-28874

run-time error after setting in reference line at value for radar chart

1. New a radar chart with some row numbers.

2. Double click the axis, go to reference lines tab.

3. Type 2.2 3.3 in Reference Line At Value and click Other place.
   ==> Run time error shows.

ORG-28861

Lock Position failed to draw in correct position for right Y axis

1. Make a group plot with the 2nd plot has a recalculate lock.

2. Select Date menu - Lock Position - First Point. → the lock is placed at 1st point of C.

3. Select Plot C, on MT Single Plot tab, click Plot on Right Y button. ==> The lock icon disappeared.

4. Polar r(X) theta(Y) plot has a similar problem.

ORG-28780

Pattern Tab Fails to Show for Independent Group Curve Fill Color

1. New a project, create a grouped multiple-lines plot.

2. In PD dlg, set Edit Mode to Independent.

3. Go to Line tab of the first line, check Enable Fill Area Under Curve. → notice that the Pattern tab shows.

4. Select other curve on the left, ==> the Pattern tab doesn’t show.

5. Uncheck for example the “Follow 1st Plot in the Group“ checkbox. → The Pattern tab shows.

ORG-28890

Manipulate Plot Setup dialog is slow when column Long Name is long

1. Make a line plot with Long Name string very very long.

2. Open Plot Setup dialog. ==> It took a few seconds to see the contents in bottom panel.

3. Try some actions on dialog, like click Layer 1 line in the bottom panel. ==> It took a few seconds to see the line selected.

4. Check Y checkbox for col C in middle panel, click Add button. ==> It took a few seconds to see bottom panel updated.

5. Check the middle panel. ==> column width of “Long Name“ or “Comments“ is very long, which is not necessary.

ORG-28937

Hard to Read Button when background color is not dark in dark mode

1. New Graph, add a text object “Button”

2. Open properties dialog, and go to programming tab, set button up

3. Enable dark mode, set background color to LT Gray

4. Mouse over button ==> button text become white

5. Move the cursor out of button ==> still white

6. Click refresh → become black

ORG-28683

Tick Label by Custom Position display wrong if display unit is set

1. In the Y axis dialog, set Display Unit = 10^3 in the Tick Label tab

2. Set Major ticks to be on custom position 0.1 1000 as in the image

==>The tick labels on custom position do not follow the display unit

ORG-28641

Legend Text Color Follow Plots fails for some plot

For some specific plot, right click the legend to select Legend: Text Color Follows Plot.

==> The Text from 2nd row to the end are all changed to white.

ORG-27826

Probability and Q-Q Template update

New a project, fill col B with random numbers, highlight it to create a Q-Q plot with default settings.

P1.A==> legend has duplicate items for low and upper percentiles.

P1.B==> upper line style was solid, which is different from lower line.

P1.C==> upper line width was 0.5, which is different from lower line.

ORG-28505

Drag to auto fill should skip hidden rows

Hidden cells will not be filled when drag to auto fill values in column.

E.g. fill column A with random numbers and add filter condition: Greater than 0.5 so some rows will be hidden in worksheet.

To fill corresponding cells in column B with text big, enter big in 1st cell of column B, then drag the bottom-right corn of the cell with big to auto fill.

Then disable filter in column A so all rows show to check effect.

Before Origin 2024b, hidden cells in column B are also filled with big, which is wrong.

In Origin 2024b, only cells that show are filled with big.

System variable @AFH is added in Origin 2024b to control the behavior. Default is 1. To roll back to old behavior, set

ORG-28869

Cell formula failed to update when it contains named range

The bug started in Origin 2022 when named range was introduced.

One example to reproduce the bug

1. Fill Col(A) with row numbers.

2. Highlight column A and choose Data: Define Name (Ctrl+L)…

3. Set Name as alpha and Scope: Book. Click OK.

4. In B1, type a formula =total(alpha) and press Enter to see calculated value.

5. Change any value in Column A

==> B1 failed to update.

Fixed in Origin 2024b

ORG-29044

Copy Paste #VALUE! from Excel becomes 15

Copy data from Excel with some cell showing #Value! and paste into Origin.

==> 15 shows in those cells.

No such issue if using data connector to import the data into Origin.

Fixed in Origin 2024b.

ORG-28082

Matrix mo2s recalculate issue

Run the mo2s XF to generate result.

==> No lock in the result.

Fixed in Origin 2024b

ORG-27806

Matrix Sheet Bad Dark Heading

Turn off dark mode for current matrix window then embed it in a workbook which is in dark mode.

Double click the embedded matrix and check.

==> The image thumbnail is in light color mode.

Note: this issue existed since Origin 2024 and fixed in Origin 2024b.

ORG-28201

hierarchy report sheet display issue

Do fitting for any data, in report sheet, add some user comment or zoom in, failed to display completely. and failed to press CTRL+W to reset to 100% if zoom in

All fixed in Origin 2024b

ORG-28448

Refresh issue about undo adding matrix object

1. Insert or add two matrix object.

2. Undo twice.

==> Fail to refresh the number of matrix object in the window’s title. And the thumbnail updates wrong.

This issue existed at least since Origin 8.1 and is fixed in Origin 2024b.

ORG-28457

Matrix Data Grid Undo Redo

Fill value in matrix then undo.

==> Fail to undo correctly. This issue existed at least since Origin 8.1 and is fixed in Origin 2024b.

ORG-28844

Gradient Fill More Colors issue in Japanese Candlestick plot

1. Make a Japanese Candlestick plot.

2. Double click plot to open PD, in Advancing Price tab, set Gradient Fill as More Colors

3. Click the drop down of Palette -->? Only one Palette

4. Click Appy

==>Fails to work. Origin 2024b hide the “More Colors“ choice for Japanese Candlestick plot type for now

ORG-28338

Fail to set palette for gray scale image on toolbar

Click New Image button to new a blank image then right click to import grayscale image.

==> The Palette button on toolbar is disabled.

Note: this issue existed since Origin 2022b. Fixed in Origin 2024b.

ORG-26975

Fail to load SVG after plotting by template with linked SVG

Insert SVG image from file to graph window. Link the SVG image then save graph template.

Plot graph with the saved template and check.

==> The SVG image on graph is not loaded.

Note: this issue existed since Origin 2023b. Fixed in Origin 2024b.

ORG-28067

Grayscale range issues in Gray Scale Slider or cvgraymax XF for double data type image

Import a double data type image and it not works fine with Grayscale Slider and Set Grayscale Range button on mini toolbar.

This issue existed since Origin 2022b an fixed in Origin 2024b.

ORG-28501

Missing value is not remembered after resizing image window

This issue exists if data type is float or I2.

This issue existed since Origin 2023 an fixed in Origin 2024b.

ORG-28817

Run time error when reloading saved digitizer project

This issue existed since Origin 2023b an fixed in Origin 2024b.

ORG-28468

Differentiate Gadget issues

1. Differentiate Gadget does not work properly if there is more than one plot in graph. Broken since Origin 2023

2. The derivative graphs on the top layer of output graph does not match symbol color, shape or line style and width, etc. Broken since Origin 2016.

Fixed in origin 2024b.

ORG-28427

Highlight the selected plot only for Cluster Gadget

If Cluster Gadgets with multiple plot, select or deselect plot in Data menu, ROI always color all plots

Fixed in Origin2024b

ORG-28818

Gadget failed to show complete GUI for old project

1. Playing gadgets like Integration on plot, make sure ROI shows and save it.

2. Open the saved projects and double click ROI to show the Integration dialog

3. Change Mode as another one in Baseline tab -->GUI updated

4. Close it and reopen the project, double click ROI and change Mode again ==>GUI fails to update

Fixed in Origin2024b

ORG-28354

Should use connector for all D&D files when select Use Connector on Select Filter dialog

1.Save two import filters for dat file.

2.Drag and drop multiple dat files into workspace.

3.Select Use Connector on the pop-up Select Filter dialog.

==>Show up Select Filter again.

Note: this issue existed since Origin 2022b. Fixed in Origin 2024b.

ORG-28830

Origin Connector wrongly overwrite user defined label rows

Origin Connector connects to Origin project file with query, will import wrong user defined label rows.

Fixed in Origin 2024b.

Note: This problem exists at least since Origin 2020.

ORG-28884

Contents between Quotes Falsely Treated as Numeric

When import the data with comma inside numeric, like "10,10,10,10,10","600031,600065,600031,600065,600031"…

==>The comma are removed, and import as numeric.

-->Fixed in Origin 2024b. Import this kind of data as text.

Note: For the thousand separator quotes, like "305,305,305,305,305", if don’t want to remove the thousand separator quotes, need to set “@STQ=1”.

ORG-28334

All tab show as empty in App Gallery after installing apps

1. Make sure some apps are not updated to latest version(show red dot icon)

2. Drag App window to floating, resize it make sure the Apps window only show one column app and scroll bar is shown, window size can be 182X298.

3. Drag &Drop to install apps.
   ==>all tab show as empty.
   Fixed in Origin2024b

ORG-28619

Crash when dragging red dot of axis in preview of dialogs

Red dots on axis is a new feature in Origin 2024 to interactively adjust axis scale.

But they should not show on axis in preview window of dialogs, such as merge graph windows, smoothing, etc. Somehow for previews with layer icon showing on axis, if user clicks on the layer icon on axis, the red dots will show. Drag it, Origin will crash.

No issue for preview windows without layer icon on axis.

Fixed in Origin 2024b.

ORG-28637

Origin crash with long font name contain more than 32 characters

1. Install a long name font with more than 32 characters such as Fira Sans Extra Condensed Medium. you can download it from google fonts.

2. Start origin, press Ctrl+U to open Options dialog, in Text Fonts tab, set Default combo as Fira Sans Extra Condensed Medium, click ok.

   ==>origin crashes

Fixed in Origin2024b

ORG-28028

Issues when background color is not dark enough

1. Turn on dark mode.

2. Make a scatter plot with data.

3. Click the Background Color mini button to change color to be Cyan.

4. Ctrl + G to open export graphs dialog.
   ==> Notice that the No Preview text shows with black color and hard to see.

5. Expand Export Settings branch.
   ==> The “Follow Dark Mode Color” checkbox is not shown. So graph is not consider as in dark mode, but the Dark Mode mini toolbar is enabled, this is conflict.

Fixed in Origin2024b

ORG-28173

Transparent error band has unexpected dropline in exported vector image

1. Open sample opj in F11 dialog, Line and Symbol Graphs - Error Bars with Fill Area, or attached.

2. Export the graph as EMF, SVG and PDF file in the Simple Export dialog

3. Open the images with Adobe Illustrator 2023

==> There are unexpected drop lines in the exported image

Fixed in Origin2024b

ORG-28528

Error message if export by expG2img dialog with system default

1. new graph

2. click File: Export Graph to open expG2img dialog

3. make sure dialog theme is <last used>, then close the dialog without exporting. If there is no last used theme, click OK to export

4. click File: Export Graph: Open dialog

5. click the triangle button of dialog theme, select system default

6. click OK
   ==> error message: Variable value is not in predefined list, VarName = dk, VarValue = -1

Fixed in Origin2024b

ORG-28666

LT Image Export PDF Crashes Origin

1. Start a new project.

2. New a graph and add a text object.

3. Make it into a button with LT script

4.  

==> Click the button, Origin crashes.

Fixed in Origin2024b.

ORG-23663

Raster export fails when graph in window view in high DPI

1. new wks, fill with row numbers

2. make 2D scatter plot, maximize the window to see the problem clearer.

3. open PD dialog, enable label, click apply

4. change page view to window view, click OK

5. export as png with default setting

•  

  Open

  

   

Fixed in Origin2024b

ORG-28778

Duplicated Row When Export HTML Table

1. Open the attached project file.

2. Copy all Open Tables(HTML) and paste to Word.

3. ==> It shows an extra line of X-Function name. It doesn’t happen for all report sheets.

Fixed in Origin2024b

ORG-28922

Graph Copied to Word Show Font Shadows if Transparent Background

1. Open the attached project file.

2. Choose Copy Graph as Image…, in the dialog, set Image Format to PNG, check Transparent Background.

3. ==> Paste to word. The texts show dark shadow. If Transparent Background not checked, no such issue.

Fixed in Origin2024b.

ORG-29043

Crash on Updating Image if Edit from OLE

1. Make a simple scatter plot, Ctrl + J to copy page.

2. Open PowerPoint, Ctrl + V to paste as OLE, close origin.

3. Double click OLE object to open origin, new a workbook.

4. Right click on Sheet1's tab, select "Add Graph as Sheet: [Graph1]".

5. Close origin (no need to save).

6. Double click OLE object to open origin again.

7. New an image, import any picture file.
   ==>Origin crashes.

Fixed in Origin2024b