Versions Compared

Old Version 85

changes.mady.by.user Timist Huang

Saved on

compared with

New Version 86

changes.mady.by.user Nicholas G.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

JIRA

SUMMARY

DETAILS

ORG-28056

Curve Arrow Tool draw drew a bad arrow compared with Origin2023

When using Curve Arrow tool, the curve arrow looks worse in some cases

The issue exists in Origin2023b and Origin2024, fixed in Origin2024b

ORG-28305

Origin Hang when open PD no longer hangs when opening Plot Details with Mini toolbarToolbar

New After making a graph and click clicking axis to show axis mini toolbar, press F2 to open Plot Detail ==> Origin hangsMini Toolbar, pressing F2 (to open PD) causes a hang.

Fixed in Origin2024b

ORG-28193

Uncheck Selectable failed to prohibit a plot from being selected

For certain projectprojects, it always selects the specified plot, and uncheck Uncheck Selectable button fails

Fixed in Origin2024b

ORG-28085

Rescale Colormap Issue Fixed in Grouped Heatmap

  1. Fill column A~C with row number, fill column D with random data

  2. select Designate C and D set as Z data, then plot Heatmap with Split Tiles

  3. Open PD, go to group tab, and set group edit mode to independent

  4. go Go to color map tab of 2nd plot, click level Level column headheader, click find min/max ==> Nothing happens.

Fixed in Origin2024b.

When edit mode is independent, it should find now finds min/max of this the selected plot, not the group min/max.

When Similarly, if edit mode is independent, we should the Mini Toolbar’s rescale colormap button in single tab of plot level mini toolbar for heatmapbutton rescales to just the selected plot.

ORG-28090

Group plot auto add added error bar bars after being set to independent

  1. make 3D bars plot with XYZXYZ data

  2. open PD dialog, select the first plot, go to error bar tab, set Z error data as col(a), click apply

  3. go to group tab, select independent, click OK
    ==> the second plot has error bar

Fixed in Origin2024b

ORG-28089

Cannot Could not change pattern color for special point of 3D bars

  1. make XYY 3D bars plot

  2. add one special point, open PD dialog for it

  3. go to pattern tab, set fill pattern to sparse, color to black, click apply

==> pattern color is not black

  1. change pattern color to yellow, click OK

==> pattern color is does not updatedupdate

  1. make XYY 3D bars plot

  2. add one special point, open PD dialog, go to pattern tab, add pattern, pattern color is auto, set border color to green, click apply

  3. select the plot in the left panel, add pattern, click OK
    ==> the pattern color of the special point is changed

Fixed in Origin2024b.

ORG-27070

By Plots Tab Support by Column LabelNow Supports ‘by Column Label’

  1. new wks with XYYY, set long name as aa 1 2 3, fill with row numbers

  2. highlight all, make 4 panel plot

  3. open PD dialog, go to layer background, set color to by layers: long name, click apply

  4. click the color button again, set to color mapping, click apply

  5. go to colormap tab,
    ==> level is from -2 to 2?

Fixed in Origin2024b

ORG-28243

Hide Hiding a single point should hide now hides corresponding error barbars

Hold Ctrl key and double click a column/bar allows user to customize or turn off the column/bar. But it couldn’t hide the corresponding error bar there.

Fixed in Origin 2024b.

ORG-27511

graph Graph objects show showed as bolded bold when insert inserting graph to 3D graph

  1. Open the sample opj, Area Graphs - XPS Area, or use P1’s opju

  2. Create a 3d OpenGL graph like waterfall from the worksheet data

  3. Copy page of the 2d graph and paste it to the 3d waterfall

==> Texts are still a little bold, check in dark mode. There is white background

Fixed in Origin2024b

ORG-28409

Point by Point legend is was used if the XYY bar use used a shape that is not Prismprism/box

  1. fill column with row number, plot xyy bar

  2. open PD, set shape to Cylinder or other shape that is no Prism/box, ok

  3. reconstruct legend ==> legend become point by point legend

Fixed in Origin2024b

ORG-28260

Layer.group1.allcols=1 failed to work if deleting 1st first Y column got deleted

LabTalk property Layer.group1.allcols=1 is used to set up a graph, created by plotting all columns in a worksheet, to auto add and remove plots when new columns are added, or existing columns are deleted in worksheet.

But this stops working if 1st Y column is deleted in worksheet.

Fixed in Origin 2024b.

ORG-28543

Origin crash in draw fixed when resizing table

  1. open attach file crash.opju, in which the graph window has table outside of graph page.

resize graph page width slowly, when the page's right edge

closes to

nears the

table

table’s left edge.

==>Origin crash.

Fixed in Origin2024b.

ORG-28565

Independent Mode does not work fine Improvements made for Fill Color in 3D waterfallWaterfall Plots using Independent Mode

  1. Open Waterfall Plots - 3D Waterfall with Line and Scatter from Learning Center (any 3D waterfall should be the same)

  2. In the Group tab of the PD dialog, set Edit Mode to be Independent.

  3. In the Pattern tab, set Fill Color to be None. Click Apply button.

==> Fill Color of all curves on graph are changed to be None4.

  1. Switch to the second plot in the left panel

→ ==> The Fill Color in Pattern tab is still FAFAFA

  1. Change the Fill Color to be black, click Apply button.

==>Fill color of the second plot on graph won’t change. It keeps to be none; remains ‘None’

Fixed in Origin2024b.

ORG-28358

Hit test failed on certain 3D XYY bar plot

Hit test failed on certain 3D OpenGL colormap surface plot

graphic card: Intel(R) UHD Graphics 770, 4.6.0 - Build 31.0.101.4575

1.New a project, open attached “3D Bar Charts - 3D XYY Cylinders.opju“

2.Mouse over any Cylinder bar on graph.

→ ==> data point tooltip showed.

3.Single click on it.

==> Z axis line is selected and axis MT showed.

4.double click on it.

==>Axis dialog opened.

Fixed in Origin2024b

ORG-28643

Polar Dendrogram connect connected leaves in wrong direction

  1. open attached CircularDendrogram.ogwu,

  2. select both columns and run run.section(plot, CircularPhyTree); in script window

==>there are two closed circle in graph, but each 10 leaves belong to one group, so the line should not connect between subgroup_10 and subgroup_11

Fixed in Origin2024b

ORG-28688

collect dirty issues of 3D graphFixed some issues that caused 3D Graphs to get marked as dirty

  1. New a worksheet with xyz, fill with random numbers, make 3D surface plot.

  2. Activate new created graph, press Ctrl+J to copy page.
    ==>* is shown in window title, which means graph is dirty.

  3. New a worksheet with xyz, fill with random numbers, make 3D scatter plot.
    ==>in new created graph, * is shown in window title, which means graph is dirty.

Fixed in Origin2024b

ORG-28741

Fail Failed to reset plot to full plot display range in C/G buildGerman and Chinese builds

In the German or Chinese Origin, plot a scatter plot then edit the plot’s display range. Reset to full plot range by plot’s context menu.

==> Run time error.

This issue existed since Origin 2021 and fixed in Origin 2024b.

ORG-28733

Some Settings Complete settings of Dendrogram not Save are now saved to Style Holder

  1. open attached project, PolarDendrogram.opju

  2. open PD, go to label tab, unchecked show labels for leaves only and auto hide overlapped labels, ok

  3. select plot and copy format, right click plot and open paste format(advanced),

  4. in All tree plots branch, select line branch, right click and select collapse all siblings.

  5. change distance type to branch to leaves, uncheck show root at zero, ok

  6. save template with this graph, template name is htreecir

  7. select 1st two columns in Cluster Plot Data sheet, run “wo -p 108 htreecir;”

  8. open PD with new graph, go to label tab ==> show labels for leaves only and auto hide overlapped labels are both selected

  9. save format as theme from new created plot ==> distance type is auto, show root at zero is selected

Fixed in Origin2024b.

ORG-28806

Symbol type in 3D scatter is changed would change after selecting independentIndependent Mode

  1. make grouped 3d scatter plot

  2. open PD dialog, go to symbol tab, set symbol type as 2d, click apply

  3. go to group tab, set edit mode as independent, click apply
    ==> the symbol type of the second plot is change to 3d

Fixed in Origin2024b.

ORG-28800

Runtime error if plot 3d fixed when plotting 3D stack surface from a user defined template

  1. Open Samples\Matrix Conversion and Gridding\2D Gaussian.ogm

  2. Add an matrix object then fill value with any numbers.

  3. Choose Plot: 3D: 3D Stacked Surfaces menu to plot.

  4. Change the palette as Maple by toolbar then save an templated named “abc“.

  5. Active the matrix and make sure the 2nd matrix object is active.

  6. Choose the Plot: User Templates: abc to plot.

==> Runtime error: Calling members of unattached wrapper class

Fixed in Origin2024b

ORG-28860

Delete Deleting Data Label should hide now hides label

Case 1: 3d3D

  1. plot a 3d scatter or bar with row number XYZ

  2. select plot, show data label with mini toolbar

  3. select data label, delete ==> plot is deleted

Case 2: 2d2D

  1. plot a scatter plot with row number XY

  2. select plot, show data label with mini toolbar

  3. select data label, delete ==> nothing happenhappens

Fixed in Origin2024b.

ORG-28852Label

selected bounding Rectangle is too large after RotateFixed the size of bounding rectangles for selected labels following text rotation

  1. open attached TextRectangle.oggu

  2. try to select red point ==>data labels are selected

  3. ORG-28852.png

    Fixed in Origin2024b

ORG-28808

Origin is slow with index faster when indexing plot color to 30000 pointsin large datasets

  1. Open the attached “20231209-BiCl3-Stability.opju“. The color of plot in the bottom layer is index to column(G) (29511 values)

==> Operations on the graph are slow, such as change the X axis scale to be 0~7 in the axis dialog

  •  

    Code Block
    sec;
doc -uw;
queue{watch;}

    Fixed in Origin2024b.

ORG-29013

3D Graph's Color Scale Title fails failed to show LaTeX formula

  1. plot a 3D graph and add color scale

  2. show color scale’s title and input formula

    Code Block
    \q(\left\langle{{F}_{l}}\right\rangle)

    == > show nothing

  3. double click at the title and the formula show

Fixed in Origin2024b

ORG-28212

Fixed an error in Plot Detail’s Vector tab mess up

  1. Make a XYXY vector plot

  2. Double click plot to open PD → vector tab looks fine

Switch to any other tab, switch back to vector tab ==> End

Point group mess up

Point group is disorganized

Fixed in Origin2024b.

ORG-28073

Crash if set Text as self infoFixed crash when text data is self-referencing

  1. New a graph window, add Text some text like aa

  2. Open Properties dialog, Programming tab, set Link to (%, $), Substitution Level to 1

  3. Switch to Text tab, set text content like to aa=$(Text.x)

==> Crash

Fixed in Origin2024b.

ORG-28332

Table Row Title Position is Wrong fixed when Label Position is not Center

  1. New graph, open axis dialog with x axis

  2. Go to tick label tab and enable table

  3. Select show table row title, apply --> Table row title show shows right after table

  4. Change label position in cell to begin, apply ==> There is a gap between title and table

  5. Set table title to begin, apply ==> Table row title run runs into table

Fixed in Origin2024b.

ORG-28183

Fixed Line Gap Gaps in Legend is Incorrect For Multiple Layers Line Symbol GraphORG-28183Graph

  1. Make a 2Ys Y-Y plot.

  2. Open PD, and go to plot level: Line tab, set "Symbol/Line interface" as "Gap to Symbol" for both plots.

  3. In PD layer level, Size tab, set Fixed Factor as 0.3 for Layer2, OK.
    ==>The line gap in legend for C in graph is incorrect.

  4. Click Layer1 than Click Layer2 on Object manager.
    ==>The line gap of plot legends in Object manager are changed.

Fixed in Origin2024b.

ORG-28147

Special point position is wrongFixed special point positioning bug

  1. Create a Line plot,

  2. select a special point, and open the plot detail dialog.

  3. double click the name of Special point. -->the name of special point is editing.

  4. Click OK.

==> the special point is in the End.

Fixed in Origin2024b.

ORG-28213

Missing Value Category Show When AA is EnableOnly Showed When Anti-Aliasing is Enabled

  1. Fill 5 rows of A B with row number, C with AA BB CC AA BB

  2. select C1 cell and clear content

  3. select all and plot scatter, set symbol color to column C → 1st point is not showshown

  4. enable Anti-Aliasing ==> 1st point showshows

Fixed in Origin2024b.

ORG-28453

Color Scale Show Levels within Range Show Extra Level

  1. fill column A B C with random data, plot color mapped

  2. open PD, go to colormap tab, set level to 0~1, with increment=0.1, ok

  3. open color scale control dialog, select show levels within range in Levels tab,

  4. set minimum to 0.3, maximum to 0.7, ok ==> tick of 0.2 still show

ORG-28520

"No Line" change plot type and plot color after reload the project

  1. Open some specific opju file, for red plot in Layer 2, change the Connect to No Line in the Line tab of PD dialog.

  2. Save project file and reopen it in Origin

==> The plot type changed to be scatter plot and the red plot turns to be black.

ORG-28350

XYZ Contour crashes Origin when ignore Z missing value if data point shows

  1. New a workbook with 3 columns, set as XYZ and fill it with random data.

  2. Make a contour plot.

  3. Run Script,

    Code Block
    set %c -cmd 1; //show data points
set %c -lczm 1; //ignore Z missing value

    ==> Origin crashes.

ORG-28515

Origin crashed when substituted legend text is too long

  1. Make a plot with very long comment (28000 bytes each) that makes super long legend string.

  2. Save as opju and then reopen. ==> Origin crashes.

ORG-28345

Fail to Copy/Paste format on Reference Lines dialog

  1. New a graph and add two reference lines in Reference Lines dialog

  2. Uncheck Auto Format for both lines

  3. Change color for one reference line and click Apply button

  4. Go to the left panel, right-click on the changed line and select Copy Format

  5. Right-click on the other line and select Paste Format, click OK button

==> nothing changes.

ORG-28569

Origin hanged when create distribution curve data for Kernel Smooth

1.Import some tif file into an image window.

2.Select Image menu - Convert to Column, click OK with default settings.

3.Highlight col A in output sheet to create a Histogram plot.

4.Open PD, go to Distribution tab, set Curve Type combo as Kernel Smooth, click Apply.

→ The curve showed on plot. (it is not slow, since it uses approximation algorithm)

5.Go to Data tab, check “Add Distribution Curves“, click Go button.

==> Origin hangs for a long time.

ORG-28569

Shift + mouse drag fail while moving obj in XY exchange graph

  1. Make a group plot.

  2. Exchange XY Axes.

  3. Press Shift key and select legend object, drag it. ==> Cannot move legend to desired position.

ORG-28792

Radar Plot messed up when there is special point

  1. Make a radar plot with random numbers, turn on the label, hold on Ctrl key and try to move it.

  2. → a special point is created.

  3. ==> The graph gets messed up.

ORG-28188

Origin hangs when batch plotting certain graph

  1. Make lines plot using big data with missing value.

  2. Right click on graph window title bar, select Duplicate (Bacth Plotting) to open dialog.

  3. Select Batch Plot with combo as “Sheet“, keep other as default, select the 2 sheets in the list, click OK.

    ==> Origin hangs. After the fix, a new system variable @PFNCSX added, 1 to turn on fix above, 0 to turn off

ORG-28377

Origin crash in remove layer

  1. New a worksheet and add three columns.

  2. fill column A with row number.

  3. fill B-E with random number.

  4. select B-E to plot 4 Panels.

  5. open plot details dialog, select the plot in Layer4, right click and select remove menu.

  6. click OK on the warning dialog. ==> Origin crash.

ORG-26867

Open Axis dialog show error in script window when there is more than 32 panels

  1. New worksheet, add one column, fill row number for 33 rows

  2. plot scatter with column A B,

  3. open PD, go to panel tab, set horizontal panel to column C, ok

  4. open script window, double click axis to open axis dialog ==> Insert branch theme error (0x20010834) show in script window

ORG-28021

Color Mapping List should have higher Priority when @DCR=5

  1. set @DCRP = 30, enable dark mode

  2. plot a single line plot with row number==>line plot color and axis line color are different

ORG-28476

Fit page to layer does not work when there is multiple breaks; Plot Break Symbol does not draw correctly for multi breaks

  1. Make a plot with multiple breaks (one in left axis and one in right axis).

  2. Select menu: “*Graph: Fit Page to Layers*“ ==> Nothing changed. There are still wide margins on the graph.

  3. Make a plot with multiple breaks (two breaks in left axis).

  4. Click on the break symbol on axis and click the last “Plot Break Symbol“ MT button. ==> The plot on second break does not break into 2 parts.

  5. Select the Y axis and press Del key to delete. ==> Plot Break Symbol does not draw.

ORG-28647

German comma decimal separator in Axis Divide by Factor not convert to period

  1. Change Separators combo to be 1.000,0

  2. New a sheet and fill x with row number and y with very small numbers so that scientific notation is displayed.

  3. Plot line graph and Y-axis should also have scientific notation.

  4. Go to Y-axis dialog and for “Divide by Factor”, enter the highest tick label

  5. Click OK and save Project and close Project.
    -->Tick labels change correctly.

  6. Change Separator back to 1,000.0 and reopen Project file
    ==>The Divide by Factor is ignored, tick labels are not correct, comma is not converted to period.

ORG-28885

Right Y axis Plot Shouldn't be Affected By Left Y LogScale

  1. Make a Double-Y plot with one left axis and one right axis.

  2. Set Left-Y axis to log scale. ==> The negative points for right axis could not show.

ORG-28677

Error bars failed to connect within subset only

  1. Make an error bar plot.

  2. Set subset. ==> Graph1 has subset turned on but error bars failed to connect within subset only. It should follow line plot settings.

ORG-28815

Reference Line Label Position Inside End - Below does not work in Chinese Origin

In Chinese Origin, the Label Position of Reference line has two same options, 末端内测-下. And if you select the two options, both options result in label in Inside End-Below. There is no way to set label of reference line to be in Inside End- Above in C Origin.

ORG-28874

run-time error after setting in reference line at value for radar chart

  1. New a radar chart with some row numbers.

  2. Double click the axis, go to reference lines tab.

  3. Type 2.2 3.3 in Reference Line At Value and click Other place.
    ==> Run time error shows.

ORG-28861

Lock Position failed to draw in correct position for right Y axis

  1. Make a group plot with the 2nd plot has a recalculate lock.

  2. Select Date menu - Lock Position - First Point. → the lock is placed at 1st point of C.

  3. Select Plot C, on MT Single Plot tab, click Plot on Right Y button. ==> The lock icon disappeared.

  4. Polar r(X) theta(Y) plot has a similar problem.

ORG-28780

Pattern Tab Fails to Show for Independent Group Curve Fill Color

  1. New a project, create a grouped multiple-lines plot.

  2. In PD dlg, set Edit Mode to Independent.

  3. Go to Line tab of the first line, check Enable Fill Area Under Curve. → notice that the Pattern tab shows.

  4. Select other curve on the left, ==> the Pattern tab doesn’t show.

  5. Uncheck for example the “Follow 1st Plot in the Group“ checkbox. → The Pattern tab shows.

ORG-28890

Manipulate Plot Setup dialog is slow when column Long Name is long

  1. Make a line plot with Long Name string very very long.

  2. Open Plot Setup dialog. ==> It took a few seconds to see the contents in bottom panel.

  3. Try some actions on dialog, like click Layer 1 line in the bottom panel. ==> It took a few seconds to see the line selected.

  4. Check Y checkbox for col C in middle panel, click Add button. ==> It took a few seconds to see bottom panel updated.

  5. Check the middle panel. ==> column width of “Long Name“ or “Comments“ is very long, which is not necessary.

ORG-28937

Hard to Read Button when background color is not dark in dark mode

  1. New Graph, add a text object “Button”

  2. Open properties dialog, and go to programming tab, set button up

  3. Enable dark mode, set background color to LT Gray

  4. Mouse over button ==> button text become white

  5. Move the cursor out of button ==> still white

  6. Click refresh → become black

ORG-28683

Tick Label by Custom Position display wrong if display unit is set

  1. In the Y axis dialog, set Display Unit = 10^3 in the Tick Label tab

  2. Set Major ticks to be on custom position 0.1 1000 as in the image

==>The tick labels on custom position do not follow the display unit

ORG-28641

Legend Text Color Follow Plots fails for some plot

For some specific plot, right click the legend to select Legend: Text Color Follows Plot.

==> The Text from 2nd row to the end are all changed to white.

ORG-27826

Probability and Q-Q Template update

New a project, fill col B with random numbers, highlight it to create a Q-Q plot with default settings.

P1.A==> legend has duplicate items for low and upper percentiles.

P1.B==> upper line style was solid, which is different from lower line.

P1.C==> upper line width was 0.5, which is different from lower line.

ORG-28993

Change Data did not work for Histogram

For some specific histogram project, right click on the histogram plot on Graph1 and select Change Y - Green.

==> The plot did not change, even after press F5 or Ctrl+R.

ORG-28331

Cannot bring back leader line once delete it

  1. Create a new worksheet with 2 cols. Fill with row number. Plot a Scatter plot.

  2. Choose Annotation tool. Double click on one data point to add a label. Drag the label text if leader line not shown.

  3. Select leader line object and press DEL.

  4. --> leader line is deleted.

  5. Double click on label text to open Properties dialog > Leader Line tab.

  6. ==> “Show Leader Line if Offset Exceeds” is still checked.

  7. Uncheck and re-check it,

  8. ==> cannot bring back the leader line.

Fixed in Origin2024b

...