Worksheet
JIRA | SUMMARY | DETAILS |
---|---|---|
Paste link in column label rows not working | Select some column and choose Copy (including label rows) Then paste link in new column's label cell. ==> label isn't copied over. | |
XYZ Gridding: TPS failed for some data and empty matrix was created | The problem existed since Origin 2016. | |
Worksheet column and row scroll position should be preserved when toggling Column List View | ||
Fill Column with a set of Date/Time Values dialog failed to accept fraction number as increment | Right click a column and choose Fill Column with: A Set of Date/Time Values... It didn't accept increment less than 1 in older versions. Fixed in Origin 2020. | |
Autofill issue for date or text with negative increment number | E.g. Enter 6/30/2019, 7/31/2019 in cells and drag to auto fill. Enter a65, a55 in cells and drag to auto fill. | |
ORG-20747 | Exchange Label with Data should exclude data type checking for the selected data(1st column) | Exchanging column labels with 1st column should always work without checking data type. |
Interpolate With Unevenly Spaced X Fail | Interpolation is now working properly even if the x values of input is largely uneven. | |
Unstack Columns by Date/Time can't output Date group values in Comments cells | E.g. if user has date values in column A and customized it to only display HH:mm Unstack column B based on date value in column A. ==> In output sheet, it showed Julian date instead of HH:mm in column Comments row. This is broken since Origin 2018b and fixed in Origin 2020. | |
ORG-19936 | Sorting removes column's categorical setting if any masked data point exists | Fill two columns with row number, set the first column as Categorical, then mask one row. Sort the worksheet or column. ==>Categorical info disappeared. |
Graphing
JIRA | SUMMARY | DETAILS |
---|---|---|
Axes Dialog slow to open when there are workbook with a lot of columns | Double clicking axis to open Axis dialog gets slower if there are workbook with many columns. | |
Fill to Next Plot with Pattern Fail | Fill area between two curves and set fill pattern. Fill area will be gone. Newly broken since Origin 2019b. | |
Fit Page to Layer damages the Graph | After using Graph: Fit Page to Layer..., to resize page, when resizing graph window, graph failed to redraw. Broken since Origin 2018 SR0. | |
Copy/Paste Axis Format Failed | Copy one axis format to other axis may fail. Newly broken since Origin 2019b. | |
Plot: Line: Spline failed with monotonic decreasing X | ||
Allow deleting rectangle box with enlarged graph | Click Scale in toolbar button and click on a graph will create an individual graph window with ROI (region of interest) box in source graph. Moving the ROI box will update the Enlarged graph. But user couldn't select the rectangle box and press Delete key to delete the ROI Origin 2020 is updated so user can delete the ROI box. Corresponding Enlarged graph will be deleted as well. | |
Failure to select custom contour line | If user turn on contour line at some level. Can't single click multiple times to pick the contour line and extract it. | |
3-Color Limited Mixing do not work in Set Colors dialog | Right click contour plot and choose Colormap: Set Colors... context menu. Choose 3-Color Limited Mixing and set colors. It failed to color as expected. Broken since Origin 2019 and fixed in Origin 2020. | |
Data Points and Grid Lines fail to show in contour when label is enable | In XYZ Contour plot, check Show Grid Lines and Show Data Points checkboxes. Check to show Labels in graph ==> Grid lines and data points disappeared. Broken since Origin 2019b and fixed in Origin 2020. | |
ORG-20807 | Fail to plot heatmap with large data | This bug was introduced since Origin 2019. |
ORG-20050 | Fail to open properties dialog for Text object if it's in Matrix | This bug was introduced since Origin 2019b. New a text object in matrix then open it's properties dialog. ==> Matrix Properties dialog opened instead. |
ORG-20811 | Paired Comparison Plot very slow for more 24 levels | In Origin 2019b or earlier versions, Paired Comparison Plot is very slow for more 24 levels. In Origin 2020, Paired Comparison Plot speed has improved and limitation is 35 levels. |
ORG-20861 | Hierarchical Cluster Analysis (hcluster) fails to highlight source rows | Fixed in Origin2020. 1.Prepare a worksheet with a few columns filled with random data |
ORG-20905 | Wrong Label for Root | Root label of tree plot should not show if no source data. |
ORG-20793 | Gap in color bar of color fly-out | Fixed in Origin2020.
|
ORG-20755 | Color is wrong in color fly-out when create special point | Fixed in Origin2020.
|
ORG-20693 | Wrong special point index when copy paste format | Fixed in Origin2020.
|
ORG-20062 | Origin frozen when adding line plot to certain graph | Origin freeze when adding some specific data (via Drag & Drop, or Layer Content) into an existing graph. |
ORG-20195 | Axis scale linking broken with custom scale | Axis scale link is broken for some data when custom scale is set |
ORG-20418 | Improvement of wrapping text of special tick label | Entering Ctrl+Enter in Axis dialog's Special Tick Label tab will auto change to %(CRLF), which means start a new line. |
ORG-20427 | Error bar shifts for Trellis column plot with Double Y axis | Make Trellis column plot with Double Y axis, set horizontal and vertical columns, then error bar will shift. |
ORG-20491 | Drawing dash line freezes Origin | Customize some specific graph with dash line on it will make Origin freeze. |
ORG-20818 | Wrong Label for Leader Line Connect Option | Change leader line connect option for special tick label: From Polyline-Horz, Step-Horz, Horizontal to Polyline-Vert, Step-Vert, Vertical for x axis. For left, vice versa |
ORG-18583 | Auto Pie chart label fails to be deleted | Remove Automatic checkbox in Plot Detail's Labels tab, so user can delete pie chart label easily in Origin 2020. |
ORG-20694 | Label selection issue of Stacked column plot | Fail to select Stacked Column plot's label when X is categorical data |
ORG-20813 | Keep Date & Time Stamp format and position when clicking it again | Make a graph and click Date & Time Stamp button. Move it to the bottom of graph window. Click Time stamp again, then Stamp is moved to top of graph window again. |
Import & Export
JIRA | SUMMARY | DETAILS |
---|---|---|
Import CSV file with custom date format is very slow | ||
Graph labels Numeric separator fails to keep page setting when exporting raster formats | For example,
Note: | |
CSV Connector only import 100 columns of data if column delimiter is comma | ||
Export Excel File Only Keep First User Parameter Line | If user has many user-defined parameter rows above data, after exporting to Excel, only 1st user-defined parameter row is kept. | |
ORG-20074 | Export Excel failed in Column List View | Fixed in Origin2020. 1. New a workbook and fill it with data. |
ORG-19989 | Exported image plots shows missing values as black | Add another layer and place the missing values of the matrix on the top as “none”. These pixels are shown as black after exporting the plot. Fixed in Origin2020. |
Analysis
JIRA | SUMMARY | DETAILS |
---|---|---|
Origin crashed if global fit with fix specific parameter | This bug was introduced since Origin 2018b. Steps to see the issue:
==> Origin not responding or crashes | |
ORG-20403 | Long names are not right if some columns are all missing values in Principal Component Analysis | This bug was introduced since Origin 2018b. It is fixed in Origin 2020. |
ORG-20881 | Analysis Template File get Growing up when do batch processing | This bug was introduced since Origin2019 which Origin save Batch Processing dialog settings into analysis template by default when do batch processing.unfortunately, some unnecessary range was also saved. and it may caused origin crashes or hang on when file size is very big. it is fixed in Origin2020. file size will be decreased after resaving dialog settings into analysis template. |
ORG-20122 | Sampling interval is lost in the summary report of Batch Processing | if the Result Sheet contains Sampling interval in analysis template, origin will also copy it to Summary report sheet when do batch processing with Append result by columns now. note: append by rows will not be supported. |
ORG-20018 | Vertical Translate fails to work in some cases |
|
ORG-20223 | Analysis lock broken after change parameters and click Cancel in Fit Peaks | The bug was introduced since Origin 2019b and fixed in Origin 2020 |
Gadget
JIRA | ||
---|---|---|
Vertical Cursor: When Showing All Info in One Label position issues | When showing All info. in one label and moving the box on top of the page, moving vertical cursor should not move the box to middle of the page. | |
Miscellaneous
JIRA | SUMMARY | DETAILS |
---|---|---|
Saving project will pop up error Undefined Variable:R# when there is R# in the long file path | E.g. the file path is long and there is R1, R2, etc. | |
ORG-20236 | Run time error when hiding menu by context menu in the custom menu organizer | This bug was introduced since Origin 2019b. |
ORG-20630 | Windows Theme changes when switch graph windows | In Origin 2019b, windows Theme changes when switching graph windows. In Origin 2020, this bug is fixed. |
Programming
JIRA | SUMMARY | DETAILS |
---|---|---|
XF failed resolve argument having comma in GOS |
|