User can disable/enable collapsible menus by check box in Miscellaneous tab of Tools:Options.

Image Added

Hide and show plots using Object Manager

• Select an element item in the Object Manager to select the corresponding element in the graph window and Vice Versa.
• Show group level for the data plot if there is grouped data.
• Show/hide plots by checking/unchecking the box before the object name. The object name corresponds to the legend name through translation mode.

Image AddedImage Added

Useful context menu tools inside Object Manager

• Hide/Show a set of plots with the same name.
• Change the order of plots in the same layer.
• Change the plot style.
• Go to Plot detail, Plot Setup, Layer Content from object manager.

Image Added

For 3D Scatter plots, XY Projection, ZX Projection, YZ Projection items are included in object manager as well.

Image AddedImage Added

Set the short name of the 2D function plot

Under the label tab of the Create 2D Function Plot dialog, we can set the Function short name.

Image Added

Short name or long name of the loose data can be changed in plot detail dialog

Open the plot detail dialog of a 2D function plot or virtual matrix plot, we can change the short name or long name of the plot.

Clicking the small button besides the name will toggle between long name and short name.

Image Added

Image Added

Allow the order of colors in the color list or the order of shapes in the shape list be flipped. 

When the Symbol Color is set to increment, can flip the order in the Color List tab. This also applies to the symbol shape.

Image AddedImage Added

ORG-12900,

ORG-12835,

ORG-13450

Changed the dialog to be tab-based for the analysis/statistics tools with long trees, especially those statistics tools.

User can change back to old GUI by setting system variable @TSD to 0. (Choose Tools: System Variables... menu. Enter TSD as Variable and enter 0 as Value.)

Image Added

ORG-13960

Before SR1, if user pressed Filter down to exclude cloneable templates that don't match the active workbook, when restarting Origin, the filter button is still pressed and no template may show in Template Library since default Origin workbook only has two columns A(X) and B(Y).

In SR1, a system variable @TLF is added in SR1 to allow this filter state to be
0. never remember, always reset to no filter
1. remember between open in same session (default)
2. remember between sessions

When plotting graph with a user-defined graph template,

system theme will be applied if this Allow System Theme to Override checkbox is checked when saving graph template

User can click edit button in Template Library to uncheck it now in SR1.

ORG-13614

Color palette is more friendly to people with color-blindness (SR2)

Error bar is supported in 100% stacked column/bar plot.

Image Added

Add Interval Plot under the Plot:Statistics.  Interval Plot plots the mean and 95% confidence interval for grouped data. 

Image Added

ORG-12927,

ORG-13065

Easier Way to Annotate Graph with Data or Label in Worksheet and Project&Window Information

Annotation Tool: Customize Display Label, including metadata support, etc.

Show Legend along Plot by Attaching Data Label on a Single Point or several points

Image Added

Image Added

Add GUI to allow the access to the leader line setting

Color, width, direction, shape of the leader line in 3D plot can be changed.

Image Added

ORG-11816

ORG-10371

ORG-12357

Legend text follow legend symbol color. Also works for color scale.

right click legend to enable object property. Setting color to Auto will have the color of the label follow the color of the symbol.

This is also support for regular text label. If there is %(n) substitution notation(s) and color is set to Auto, it will use the 1st substitution notation's corresponding plot's color for the whole text

Image AddedImage Added

Also works for color scale label

Image Added

Show color scale as blocks of colors and their corresponding range

1. In the Color Scale Control dialog, we can change the display format of the labels from just showing a value to showing a range. (see the result)

Image Added

2. Allow color bar to be separated.

Image Added

3. the result：

Image Added

Notation to Alignment different portions of text in multiple line

add "\^()" as cell anchor, use alignment from the whole text object "\^(l)", "\^(c)", "\^(r)" are LEFT,

CENTER and RIGHT alignment respectively.

"^(lu)" means the text before and after this anchor is a unit, the part before and the part after will not be added extra space by drag and control. But the part before and after "^(lu)" will still consider the alignment separately, like it contain 2nd level.

Image Added

New, Powerful Color Chooser: Larger Color Collection, Easier Way to Pick Custom Colors, and Recent Colors

In the plot detail dialog, can set the style and width of the line to be mapped to a column.

Image Added

Add Incremental option in Plot Detail dialog under Layer level allowing draw small blocks first.

Image Added

If two blocks are of equal size, can let them show side by side by check the "Show Overlapped Column/bar" box.

Image Added

ORG-12531

ORG-13371

ORG-13380

Specify subgroup according to its column label

In the plot detail of grouped box chart plot, allow the color of the box to map to which level of the group which is very useful for dataset with unbalanced group size.  

Image Added

1. if color is set to vary between subgroups, each group starts with same color(red here) although the size of each group differs(3-4-3 here).

Image Added

2. If color is set to vary within subgroups:

Image Added

Stack plot support groups defined by column label

In stack column/bar plot, if subgroup is set based on column label, then we can have the column/bar to stack based on that subgroup.

 Image Added

In this case, subgroup are set based on "Parameters" . 

Image Added

The resulting bars are colored and stacked based on this subgroup. 

Image Added

Grouped box chart plot from raw data can sort plot order by group info

Add a check box "sort By Group Labels" to allow nested sorting of the box labels:

Before sorting, boxes are ordered by appearance order.

Image Added

After sorting, boxes are ordered alphabetically on each group label.

Image Added

Under the Pattern tab in plot detail dialog, user can set the filled pattern with index referencing to other dataset. 

Image Added

A new tab "Pattern List is" is added when increment or indexing is selected in fill pattern where user can customize the pattern list.

Image Added

Add scaling factor for both X and Y direction

Set Multiplier for each plots to enlarge some details.

Image Added

Image Added

Keep Proportion of Stack Lines by Offset on Log Scale

By checking Keep Propertion of Plot Range, user can still see details of each stacked plot on nonlinear log scale.

Image Added

Image Added

ORG-8933,

ORG-13633

Under the Miscellaneous tab in the page level dialog of the graph, add the option Match modifiers by( for template and copy format) that allow users to customize the modifier mapping method when copy format and plot with template. Users can fetch the modifier column by  <offset> ,longname , shortname, etc. 

Image Added

In this case, two plots are made from col(B) and col(C). In Graph1, the color of the points are mapped to col(D) with longname color.  Setting Match  Modifiers by to longname makes the plot2 colormap to the column with the same column longname, col(D) in this case. If set Match Modifiers by to <offset>, the color mapping column will be specified by the relative position to the plotting column. 

Image Added         

The tooltip in the plot detail dialog of the plot shows the modifier match method.

Image Added

Y-Value color mapping was only supported for line plots including waterfall plots. Since Origin 2016, we added it for plot plot types that support colormapping.

E.g. 

1. Import Group.dat under Samples\Graphing folder.
2. Select column B, C and D to plot them as scatter graph.
   --> Each plot has a unique color, e.g. B is black, C is red and D is blue.
3. If you want to map color of the points to corresponding Y values, click on any scatter point
4. Click Line/Border Color  dropdown list on Style toolbar.
5. Go to By Points tab, choose Y-Value: Color Mapping.
   --> Each point is colored based on the Y values.

When using Y-Value Color Mapping. Origin find the min and max of all Y plots in the group and build colormap levels.

On Plot Details dialog, you will see on Group tab, color's Increment column is set to None, while on Symbol tab, Symbol Color is set to Y-Value: Color Mapping. 

On Colormap tab, the Levels are from min to max of all Y columns in the group of plots.

For column/bar or area plots, the color control is on Pattern tab.

Context menus on Axis to easily bring axis to front or push to back. (SR1)

ORG-12862

Before SR1, user must use Plot Details dialog to change group plot Edit mode to independent to edit each plot independently.

In SR1, user can right click group e.g. g1 in Object Manager to change edit mode.

ORG-13936

Before SR1, user needs to use Remove context menu, Object Manager or some dialogs to remove data plot.

In SR1, user can click on a plot and press Delete key to remove it. For group plot, whole group will be removed. Undo is supported.

Copy and Paste Plot in Graph window. (SR1)

Copy two columns of numeric values from notepad or webpage and paste as plot in Graph window (SR1)

It must be two columns of numeric data. 1st column will be treated as X and 2nd column will be treated as Y.

• Sytem variable @DPPR controls the minimum number of rows to enable this feature. Default is 2. E.g. if @DPPR,=5, it means there must be 5 or more rows of data to support paste as plot. If there are only 4 rows of data, it will not be pasted as plot. @DPPR=0 will disable this feature.
• @DPPT to control what plot type to paste as. 200 (default)= Line; 201=Scatter; 202=Line+ Symbols
• Right click the plot to create data worksheet.

In SR1, after copying page, user can right click in another graph window, layout window, worksheet gray area and choose Paste Link context menu or Edit: Paste Link menu.

Double click it will go to corresponding graph window to customize further.

Changes in source graph will be updated in paste linked one.

User can right click a plot and choose Copy as Line Object.

Then Ctrl+V to paste it in same graph or new graph. It will be pasted as a line object.

This is another way to quickly compare two curves.

User can also go to worksheet to paste the data behind the line object.

Before SR1, after using File: New: Function Plot: 2D Function Plot menu or 2D Function Plot toolbar button to create a function plot, it took several steps to create the data copy of the plot.

In SR1, just right click the function plot and choose Make dataset copy of Fn to create the dataset. User can also click Workbook button in Plot Details dialog to create the dataset.

Before SR1, if user pressed Filter down to exclude cloneable templates that don't match the active workbook, when restarting Origin, the filter button is still pressed and no template may show in Template Library since default Origin workbook only has two columns A(X) and B(Y).

In SR1, a system variable @TLF is added in SR1 to allow this filter state to be
0. never remember, always reset to no filter
1. remember between open in same session (default)
2. remember between sessions

When plotting graph with a user-defined graph template,

system theme will be applied if this Allow System Theme to Override checkbox is checked when saving graph template

User can click edit button in Template Library to uncheck it now in SR1.

Smart Plotting from Cloneable Template and New Template Library

ORG-12416,

ORG-11004

Switch Layer or Create New, and Move Plot Order in a Group in Layer Contents Dialog

Adjust line space between lines in Text Object including Legend

Change the line spaces in the properties of text object:

1. Go to Property in the menu contents of the legend and make changes in the Line Spacing

Image AddedImage Added

2. The gap between lines is enlarged.

Image Added

When merging graphs,  now allow to put label to different positions of the plot.  inside or outside, left or right.

Image Added

ORG-12903

ORG-5396

Set Layer Width or Height by Common Scale

In Layer Management and Merge Graph Windows dialogs, check boxes to set layer width or height by commonb scale are added.Image Added

Before and after setting layer height to common scale.

Image AddedImage Added

Align linked Layers at Specified Value

In Plot Details dialog, when linking Axis, choose Align, Two layers will be aligned at the specified value.

Image Added

Can also align layers in Layer Management dialog

Image Added

In Plot Setup Dialog, add a Preview button that gives a preview of the plot.

Image Added

Support different matrix display method.

Image Added

More option for tick and label show hide in GUI

Image Added

Can set whether changing of one layer apply to all the other layers in page level.

Image Added

ORG-12795

ORG-13226

Set Graph short name and long name during batch plotting

Right click the graph page, select Duplicate(Batch Plotting) to bring up the dialog.

1. Set graph short name and long name using metadata

E.g. in image blow, Graph Short Name is set as 1st plot's Worksheet Display Name.

Graph Long Name is set as each layer's 1st plot's column long name connected with dash.

Corresponding LT syntax shows in the boxes.

Image Added

2. Select worksheet or columns to batch plot and click OK. Graph names are set accordingly.

Image Added

Preset Graph short name and long name in template

Image Added

When plotting Graph with this template, the graph short name and long name will be set so.

Image Added      Image Added

In Origin 2016, if user mark a graph template as cloneable during saving, user can directly clone a new graph with new data using such template. 

Save Template As Dialog Changes

• Mark as Cloneable Template

Image Added

• Preset Graph Short Name and Long Name

Image Added

• add "Match modifiers by" to Save template dialog

Image Added

• Still support plotting from built-in system template.

Image Added

• Clone Graph from Plot: User Templates: menu

Image Added

• Template Library only Shows User-Defined Templates

Image Added

ORG-12737,

ORG-12710

Set Global Axis Units and Scientific tick label Display in Tools: Options Dialog

1. Now supports dragging the special tick labels individually to customize its position. 
2. The special tick font can be customized via toolbar.

Image Added

How to...

1. Go to the plot detail of a graph. Select the Size/Speed tab under the layer level.

Image Added

2. When the box before Link Axis Length to Scale with X:Y is checked, we can link the graph axis length to the scale by any ratio.

Before linking the size to scale.

Image Added

Set the link ratio to 1, axis length to scale ratio is the same for x and y.

Image Added

Use discrete as plot scale type to skip weekend when plotting

When plotting financial graph where there is no trading on weekends and holidays, there used to be a gap in axis.

But now in Origin 2016, by using Discrete scale type, there will be no such gaps and the data will look more cotinuous.

This is the default setting for all plot types under Plot: Stock: menu.

Image Added

If Discrete is set as scale type, no gap between candle sticks.

Image Added

Old way: Axis Scale is Linear, there are gaps on weekend and holidays.

Image Added

Basically if Discrete is set as scale type, missing data is not plotted and continuity preserves.

Image Added

Add a Line option under Plot: Stock menu and the toolbar

If make line plot with Plot:Stock:Plot, x axis scale type is set to discrete by default.

Image Added

Allow base line position to be customized

Now baseline position can be set to any value while keep the axis unmoved.

Image Added

before specifying the baseline.

Image Added

After setting the baseline to y = 0.6. The x axis is unchanged.

Image Added

In Origin 2016 SR0, Origin has implemented the contour triangulation algorithm to be based on raw X and Y data instead of normalized X and Y data as used in old treatment. To revert to old behavior, you can run the command below in Script Window or Command Window and refresh to see:

page.triangulationnormalizedata=1;

Image Added

In Origin 2016 SR3, there is GUI access to revert.

Image Added

ORG-13004

Concatenate multiple image files as a single one, and save it to a specific path.

How to...

1. Select the interested datapoints on the plot.
2. In the Cluster Gadget dialog, click the Add Categories button.
3. In the Create Categorical Value dialog,  give a name to the new group(CustomerGroup ) and names(group3) for each category. 

Image Added

       4.  This will generate a new column in the source data which denotes the category info of each points.

Image Added

          5.   Data points can be recolored referring to the new category info.

Image Added

In Nonlinear fitting dialog, add "Equation in Notes" in the Output section that user can choose to display the equation with fitted parameter values. 

Image AddedImage Added

ORG-11945,

ORG-5211, 

ORG-3207

Improvements on statistics gadget

On ROI Box tab,

1. Add more flexibility of controlling Mean Line such as Style, Width, Color.
2. Can show SD line as well.
3. Add Line Length dropdown list with options: Within ROI Box, Span to Layer, Custom.

Image Added

Tag Line(s) option is added in the fly-out menu.

User can click it to add Mean&SD lines and labels in graph.

Move or delete the gadget will not remove the tags.

Image Added

Add curve translate gadget

When click the > button. Now the customer can:

1. switch between horizontal translate and vertical translate.
2. Can set the translate mode to stack offset(source data doesn't change) or data update.
3. Translate Duplication in allows to save the updated data to new columns, new sheet, or new book.
4. If grouped data are plotted, can specify the curve to translate by Change data.

Image Added

In NLFit and PA fit control dialog,  add Invalid Weight Data Treatment enabling customer to replace the invalid weight data.

Image Added

Image Added

 Add two checkboxes Predicted vs. the Order of the Data Plot and Stack with Residual Plot (both default unchecked) in the Plots tab in Multiple Regression dialog. This will generate extra two plots in the result that shows the dependent variable/predicted variable vs row number  and residual vs row number. 

Image Added

  Image Added

Peak Analysis：Support Snap to Spectrum in peak finding

In PA dialog, add an option Snap to Spectrum in find peaks page so that the spectrum height will be automatically calculated from the curve. This is useful that customer only need to save the peak center in the theme and the height will be calculated.

Image Added

In the PA setting baseline step, relative column position is used as baseline input if only column number is set in Dataset. This is useful in Batch processing that user wants the same column in each worksheet as baseline.

Image Added

Under Result:Create Report Graph, can add result table to the source graph.

Image Added

Customer is now able to set the intercept and slope of the straight line as the base line.

Image Added

When peak analysis goal is Fit Peaks, we added a Treenode type branch Peak Fitting Bounds that customer can preset the bounds of fitting parameters.
The bounds can be set as: None (default), By Difference or By Percentage.
After the setting, the Bounds in the fit control in the next page will be automatically updated.

Image Added

User has the option now to exclude the baseline info from the saved theme that user can manually set the baseline with other parameters are predefined in a theme.

Image Added

In the Peak Find page, inside Peak info dialog, peaks can be selected/deselected through the enable check box.

Image Added

Peaks can also be sorted using the sort center ascending button.

Image Added

It also works for anchor info dialog.

Image Added

Add Asymmetric Least Squares Smooting option in Baseline Mode drop-down list.

Image Added

Deming method is added to Linear fit with X error dialog.

Image Added

ORG-12690

ORG-10264

In doing Linear Fit, NLfit, Fit Linear with X Error, Polynomial Fit dialog on graph,  add a "..." button after the edit box of Quantities in Table. It will open a dialog to add or delete the quantities to put in the graph table. In the following example, when only "Equation","Intercept","Slope" are selected, the table displayed in the graph only shows these three items. 

Image Added

The nonlinear fitting dialog also has this feature. 

Image Added

double click the report table will open the Quantities in Table dialog that can choose the variables displayed in the table.  Right click the table and select "Go to Worksheet" context menu leads to the real worksheet of the table. 

In linear fit gadget, add a checkbox "X-Intercept" under parameter list branch on ROI Box tab when it is linear fit that it shows the x interception. 

Image Added

Add Binomial as smoothing method now.

Image Added

Support Test for Lack of Fit test

It is available in Linear Fit, Polynomial Fit, and Multiple Linear regression.

Image Added

Support means comparison on interaction combinations in two-way ANOVA.

1. In the Two-way ANOVA dialog, select interactions to include the interaction terms in the ANOVA model.

Image Added

2. In the result worksheet, the means of the interaction terms are also compared. This is useful that people are able to compare means between sub groups.

Image Added

1. Three factors are included in the ANOVA model. (Statistics:ANOVA:Three-way AONVA)
   Image Added
2. different interaction terms can be added to the ANOVA model:
   Image Added

1. Test for Partial Correlation with controlled variables. (Staticstics:Descrptive statistics:Partial correlation coefficient)
   Image Added
2. Results show the partial correlation coefficients and the significance.
   Image Added

1. Cross Tabulation table for categorical dataset. (Statistics:Descriptive Statistics:CrossTabulation)
   Image Added
   
   
2. Resulting Contingency table

Image Added

1. Add Gamma to the Distribution combo.
2. Below "Score Method", add checkbox Confidence Band, default checked.

Image Added  Image Added

Customer can make t-test on the summarized data with the knowledge of mean, standard deviation, sample size.  This is implemented on: One-Sample t-Test, Two-Sample t-Test, Pair-Sample t-Test. implemented 

Image Added

ORG-13697

ORG-13665

When choosing Analysis: Mathematics: Integrate..., Integration Result checkbox is added in the dialog to put areas to worksheet.

We used to output area in Results Log only.

ORG-13782

Gadget: Add more separate options for Label Box in Quick Fit Gadget  (SR1)

Define and access Project Variables in Set Column Values dialog

Before 9.3, after unstacking data based on a group column, group info. can only show in column label row.

Now it can show in columns next to data.

Image Added

ORG-13118

ORG-3364

Worksheet Script can be managed from Worksheet Properties dialog now.

Image Added

ORG-13070

In this example, columns with x > 604 are hidden. Select all the columns to make a 3D waterfall plot, the hidden columns are ignored..

Image Added

ORG-12873

When one cell is copied, select multiple cells and click Edit:Paste Link, the link of the single cell will be pasted to multiple cells.

Image Added

ORG-13404

Menu contents of Mask when whole column is selected supports apply Mask:

Image Added

ORG-13128

When append worksheet, can specify the columns to be included for each worksheet.

Image Added

In the impCSV dialog, now we can save the import settings to sheet. If it is selected, Drag and drop .CSV file into worksheet will apply the filter saved in this worksheet.  Now supported file type: Excel, CSV, ISF, SAS. 

Image Added

This is an an easier way to do Batch Analysis without the need to save analysis template.

E.g. after doing analysis on one imported data, if user wants to batch process multiple data files,

just choose Import Multiple ASCII. Set Import Mode as Start New Book/Sheet and Template Name as <clone>

New data will be imported in new workbook/sheet with same analysis done on it.

If user doesn't want to clone current workbook/sheet, set Template Name as <system default>

Image Added

This is also useful for batch plotting.

E.g. after plotting some graph with imported data, embed the graph as floating graph in worksheet, into a cell or a new sheet in workbook.

Then import multiple data files with Import Mode set as Start new book/sheet and Template Name as <clone>

Image Added

In Single ASCll import and mulitiple ASCll import, Script can be run after importing.

Image Added

In Single ASCll import and multiple ASCll import, Column designation is supported now in the import dialog.

Image Added

Like in impASC, header information can be inputed into system parameter or user defined parameter.

Image Added

Add Template Name entry below the Import Mode combo.

It is enabled when import mode is Start New Books or Start New Sheets.

Image Added

Import Wizard supports relative File Path in User Defined data type's C file.

In import wizard, if importing user defined datatype, now add the relative path <User Files Folder> and <Data Folder> in the Origin C source File.

Image Added

In Import Wizard and Import Multiple ASXCII dialog, add the option to apply partial import starting from the second dataset file, thus allow importing XYXY data into XYYY data if all the input X columns are the same. 

Image Added    Image Added

Easier to Send Graphs to PPT with consistent style with no need to set Slide Master in PPT

1. Allow choosing which graphs to insert and in what order by set Select Graph(s) to be Specified – in the past, you can only change slide order with Slide column in Project Explorer.
2. Allow insert multiple graphs to an existing PPT or PPT template file from a specified start slide. Each graph can be added as a new slide with same style and layout as start slide (Slide Mode: Start New) or choosing Overlay Existing to put each graph to existing slide.
3. Send graphs to an opened PPT file or PPT template

Image Added

• Support Importing ISF Files
• Support Importing SAS Files
• Support importing BRUKER OPUS data files 
• Support to import the new version (V7.3) Matlab file(not support yet)
• Update SPE Import to support File version 3.0
• Support exporting CGM / DXF type in 64bit.
• Support 64-bit Sqlite
• Support HDF5
• Support to import html table from website
• Support import dBASE .dbf file

Released HDF5 Browser APP.

This app shows the structure in a modeless window from where users can decide which elements to bring into Origin, and it supports .mat(v7x3) and .hdf files.

Upgrade tdm/tdms dll to 13.0(NI Diadem 2015), even though the file version seems to be still 2.0.

This is a very specific import type. It will become an option during installation, and not selected by default.

System variable @emrd controls whether to draw text via polygons upon drawing EMF in remote desktop environment.

We found since Win8, no such issues. So

For OS Win7 or older, the default value is set to 2.

For OS Win8 or later, default value is set to 0.

Add (Re)Naming Worksheet and Workbook controls for BRUKE OPUS file import.

ORG-6175

ORG-13782

Add more separate options for Label Box in Quick Fit Gadget  (SR1)

ORG-13009 

ORG-13010

ORG-12883,  ORG-12738, ORG-12632

ORG-13347

ORG-13282

Provide a tool to run R command and script in a console

1. Data can be transferred from Origin to R and vice verse.
2. Different data types in R (Vector, Matrix, data frame ) are supported.
   Image Added

Support Rserve that enable using R remotely

support logging on R server remotely.

Image Added

LabTalk function DatePart (datepart$, d [, n])

to return a single part of a date/time, such as year, month, day, hour, minute, etc.

n=0,1, 2, 3, which is meaningful only for weekday and week. (see WeekDay() for reference)

Examples:

1. In Script window, run 
   dd = date(10/30/2007 12:15:32.123449);

v=datepart("yyyy", dd);

2. If column A is date column, in Col(B), use Set Column Values dialog

datepart("do", col(A)) //Get date part only

datepart("to", col(A)) //Get time part only

Image Added

ORG-13843

There was switches to suppress message of Error or Info types, but not for Warning and Results types.

cd newpath:="D:\Temp"; // suppose there is a folder "Temp" is disk D, a message will be dumped to Script Window.

We may add switch -sw to suppress warning message and -sr to suppress result message.

cd -sr newpath:="D:\Temp"; //no message will be dumped.

1. Added an extra member function for matrixbase.

BOOL GetSubMatrix( matrixbase & mbTarget, const vector<uint>& vnIndices, BOOL bRow = TRUE  )

Can get some rows/cols from the matrix by indices that not need to be continuous. e.g. row 1,3,4,6.

2. Added an OC function.

BOOL MeshGrid( const vector &vX, const vector &vY, matrix &mX, matrix &mY )

Repeat vectors vX, vY to form two matrices.

Default behavior is not changed, need two steps to apply it.

1. Before create graph object, run following OC code to enable it.

BOOL OC_EnableRescaleIncludeGraphObjs(BOOL bEnable)
{
	GrObjCommonProp prop;
	okutil_access_graphobject_default(GROBJ_TN_UNKNOWN, &prop, AGRD_DEFAULT_GET | AGRD_PROPERTY_COMMON);
	BOOL bOldVal = prop.bRescaleInc;
	prop.bRescaleInc = bEnable;
	okutil_access_graphobject_default(GROBJ_TN_UNKNOWN, &prop, AGRD_DEFAULT_SET | AGRD_PROPERTY_COMMON);
	return bOldVal;
}

2. After create graph object, run Labtalk to enable it on layer.

layer.rescalego = 1;

Labtalk: Add extra read-only system string registers (SR2)

Add new substitution characters with two characters with formatting as %@A - %@Z. 

A: Apps root folder

F: Active folder name

H: Book name that contains the embedded graph

P: Active folder full path

Y: User AppData Root

page.isEmbedded now can return the type (floating, embedded) of the specified page (image, graph, or sparkline), rather than just 0 or 1 to indicates whether was popped from an embedded cell or not as before. page.isEmbedded$ should always return parent sheet range.

X function can now accept LabTalk StringArray as arguments.

We will continue to make more Add-in tools available for Origin 2016. To find out what is available, choose Tools: Apps on File Exchange: menu and see what's available there. E.g. Insert Map Images, Plot Submatrix and ODESolver for now.

There is a new dockable window called Apps on the right edge of Origin workspace. Click the icon to launch the App.

• Heat Map with Dendrogram: http://www.originlab.com/fileExchange/details.aspx?fid=223
• Import Shapefile: http://www.originlab.com/FileExchange/details.aspx?fid=285
• Maps Online: http://www.originlab.com/fileExchange/details.aspx?fid=240
• ODE Solver: http://www.originlab.com/fileExchange/details.aspx?fid=222
• Plot Sub Matrix:http://www.originlab.com/fileExchange/details.aspx?fid=228
• Send Graphs to Word:http://www.originlab.com/fileExchange/details.aspx?fid=238
• Simple Fit:http://www.originlab.com/FileExchange/details.aspx?fid=239
• Tangent:http://www.originlab.com/fileExchange/details.aspx?fid=227

Image Added

Image Added

ORG-14309

This is a very specific import type. It will become an option during installation, and not selected by default.

Improve Audit Log Time recording (SR2)